Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…
view full answer...Hey Fred, so the Curt A30 hitch part #C16070 is a really solid hitch that does fit the OEM pucks of your 2025 GMC Sierra 3500 and you'll really like. Whether or not it will allow for turning clearance is going to be based on the nose of the…
view full answer...Hey Fred, so this is a great question but one of the reasons the A hitch came to be was that the Q series hitch can't be used with the Sidewinders like the part #RP34FR as the jaw design and and head end up getting damaged. So the A Series can be…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...Because your trailer has a Turning Point pin box and your Ram has a 6.5' bed I do recommend going with a fixed hitch and using the Turning Point as a rotating pin box to give yourself enough turning clearance. With you also having a puck system…
view full answer...You will need to measure the diameter of the spindles where the seal and bearings ride. Check out the picture I attached that shows where this is. You will need an exact measurement so either a digital or dial caliper will be needed. To pick out the…
view full answer...Hey Brian, I have some less than awesome news. The Q20 hitch actually wasn't designed to be used with a pivoting pin box like the Turning Point so there isn't a wedge we can recommend you use. This is one of the reasons Curt redesigned the…
view full answer...According to what Progressive Dynamics recommends, the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4560K18LS8 is the correct replacement for your WFCO WF-9960 converter.
view full answer...While the Curt Q-series of fifth wheel hitches are not compatible with the Rota-Flex line of pin boxes, the Curt A-Series line of pin boxes are compatible. The head of the hitch and the pin box actually work against each other so that's why…
view full answer...The puck system has the same spacing in the short bed and the long bed of your 2020 Ram 2500 with the factory prep package, so your short bed is perfectly compatible with the fixed Curt A25 5th Wheel Trailer Hitch for Ram Towing Prep Package #C16046.…
view full answer...The Reese Sidewinder 5th Wheel King Pin with Rotating Turret #RP34FR that you referenced weighs 205 lbs.
view full answer...There are differences between the Curt A20 #C16044 and Curt Q20 #C16530-16021. The grease fittings, like you mentioned, and the A20 is slightly taller, ranging from 14 to 18 inches in comparison the Q20 at 13 to 17 inches. The two largest differences…
view full answer...Related Searches
Filter Your Search
Contact and Help