Result: bx2681

The Demco Air Force One Flat Tow Brake System #DM54YV is the kit specifically designed for 2019 and Newer Spartan K2 400 RVs which come prepped with the Safe Haul from the factory.

It appears that all you going to need is the Replacement Lippert 4-Point Leveling System Control Brain Wiring Harness #LC178278. This wiring harness will allow you to plug your new Replacement Lippert Leveling Control Brain for 4-Point Leveling…

I checked with Lippert and the part number you mentioned corresponds with the Revolution Kwikee step and the replacement control module you need then is the part #LC363985.

It sounds like you are asking about connecting the breakaway switch of the Brake Buddy Classic 3 Portable Supplemental Braking System #HM39494. I cut out some pages from the instruction manual for you to check out, but what you'll do is actually…

One end of the umbilical cord that comes with the Brake Buddy Stealth Supplemental Braking System part #HM39530 is a 7-blade round connection that connects to motor home's 7-way plug. The other end is a 7-flat connector that plugs into the…

The Brake Buddy Classic 3 Portable Supplemental Braking System, #HM39494 comes with the BrakeBuddy Towed Vehicle Battery Charge Kit, #BB54FR. This should be used when installing the Supplemental Braking System, #HM39494. There's good chance the…

You will want to check your owner's manual to verify, but there should be a fuse for your trailer connector in a fuse box under the hood or under your dash. I looked at the online manual for your 2002 F250 and it looks like the fuse is going to…

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

The biggest difference between Dexter brake assembly #23-459 and etrailer/AxleTek assembly #AKEBRK-7L-SA is the pad material. The Dexter assemblies use pads that are snapped off of a long strand of the material. The ones on the etrailer assemblies…

Most of the time the 4-Way connector is wired as follows. Looking at the front of the socket on the vehicle side with the cover raised the top left pole is the yellow, left turn/brake pole, the top right pole is the right turn/brake pole, the bottom…

We do offer replacement parts for the SMI Air Force One Supplemental Braking System #SM99243. These items include a replacement Installation Kit for the motorhome, part #SM99627, a Replacement Towed Vehicle Installation Kit #SM99226 as well as other…

The switch on the actuator for the Air Force One #SM99243 is a reed switch. It detects the presence of a magnet on the inner part of the actuator. When the magnet is near the switch the light is off. If you removed the reed switch and used a magnet…