Search: bwts20040b   >  

Hey Chris, the overall height of the Aries AdvantEdge Headache Rack #AA88VB that you referenced is 26-1/2 inches. It's not difficult to remove but wasn't designed for getting removed and installed super easily. There's no…

I Recommend the etrailer Trailer Hitch Receiver #e48AR for your 2020 Jeep Compass. The Receiver #75699 is a custom fit on certain model year Jeep Grand Cherokees. Our Receiver #e48AR has a hidden cross tube and a matte black finish to give it a…

On oil bath hubs the seals are different than standard grease seals. The correct replacement for what you have is #91030. Unitized oil seals like this have a part that stays fixed and a part that rotates with the hub for optimum leak protection. I…

There isn't really a specific way that the 2-Piece Polypropylene Trailer Vent #HMAV2-AVT2 has to be mounted. You could mount it like in the pictures or in any other orientation. It's just that with the openings pointed down it is much…

I do have an option for you but Atwood was bought out and their replacement parts are no longer available, including the repair kit you would need. The best option is to replace that A-frame coupler with a new one that attaches to a 2 inch hitch…

Hi Robert, The Curt Pintle Hook #C45908 would require that your EZ Loader boat trailer has a lunette ring for the coupler. From what I can see the 26-30ET should have a surge brake coupler that would couple to a standard ball mount. You'll need…

The shortest hitch extender we have that is compatible with Class I and Class II, 1-1/4" hitch receivers is the Hitch Extender For 1-1/4" Trailer Hitch Receiver 6" #HES6. Unfortunately we do not have any hitch extenders that are…

From what I could find on the Dexter 072-042-00 leaf spring, it appears to be the standard 1-3/4 inch wide double eye spring which is 25-1/4 inches long and rated up to 1,750 pounds (per spring). With that said, the 4-Leaf Double-Eye Spring for…

Yes, for this you are going to want to take a look at a powered drive conversion kit like the Bulldog Powered-Drive Kit for Single-Speed Jacks part #BD1824200100. This kit is designed specifically for Bulldog trailer jacks but can most likely be used…

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…