Search: bwts20037b   >   Trailer Hitch Ball Mount   >  

For a grease seal that is used with a Dexter 6,000 EZ Lube axle and hub assembly like part #8-201-9UC3-EZ, you would need part #RG06-090. This comes with a quantity of 2 seals in the package. It has an inner diameter of 2.125 inches and an outer…

On oil bath hubs the seals are different than standard grease seals. The correct replacement for what you have is #91030. Unitized oil seals like this have a part that stays fixed and a part that rotates with the hub for optimum leak protection. I…

I Recommend the etrailer Trailer Hitch Receiver #e48AR for your 2020 Jeep Compass. The Receiver #75699 is a custom fit on certain model year Jeep Grand Cherokees. Our Receiver #e48AR has a hidden cross tube and a matte black finish to give it a…

It sounds like you are trying to decide between the B&W Tow & Stow 3-Ball Mount part #BWTS20049B which has 7" of drop and the B&W Tow & Stow 3-Ball Mount part #BWTS20048B which has 4-1/2" of drop. If that is the case then…

I do have an option for you but Atwood was bought out and their replacement parts are no longer available, including the repair kit you would need. The best option is to replace that A-frame coupler with a new one that attaches to a 2 inch hitch…

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…

I do have a grill guard option for you but I called my contact at Westin and they were not able to confirm fitment of the Westin Sportsman Grille Guard with Winch Plate part #40-93845 on your 2017 Chevy Colorado ZR2. For a grill guard that is a…

Though we do have the Bearing Buddy #BB2441T-SS that is a direct replacement for Tie Down's Turbo Lube oil baths, this will require you changing over to grease instead of oil. With that said, we do also have the Kodiak XL ProLube Kit…

The B&W silencer pad, part #BWTS35025, fits all of the 2-1/2 inch B&W Tow & Stow ball mounts, like part #BWTS20049B as an example. With that being said, since trailer hitch pin holes aren't all at the exact same depth sometimes you…

The hub you have is a 3,500 lb idler hub that has a 5 on 5 inch bolt pattern so you'd want the part #AKIHUB-550-35-K and you'd be set! This comes with bearings, lug nuts, a grease seal, and a grease cap/dust cover. Or, we have the part…

The Gen-Y ball mount #325-GH-064 is 12-1/2 inches long from end to end. It's about 9-1/2 inches from the pin hole to the center of the larger of the two balls. This is longest ball mount for a 2-1/2 inch trailer hitch receiver and is rated for…

It appears there is not a ultimate plus kit available for the 2023 F250 at this time. Even air lift does not list one in their catalogue. It is possible that they will come out with one in the future, but there is really no reason to wait for them to…