Search: bulldog adjustable trailer coupler   >   Adjustable Trailer Coupler   >  

Hello Ryan. The #CA-5196-B Ram Sleeve Lock A-Frame Trailer Coupler and the Bulldog #BD028288 are fairly similar. They are both 50 degree a-frame couplers designed for a 2" ball and both are about 16" long overall. The main difference is the…

Dico was bought out by Titan who now offers 5-on 4-1/2 idler hub #DX22XR. This hub is rated for 2500-lb axles and includes bearings, races, grease seal, grease cap, and lug nuts. You can be assured it will fit the trailer spindle as long as the…

From what I could find online it looks like the Lippert 8K axles use inner bearing #25580, outer bearing #02475, and a grease seal that has an inner diameter of 2.250". If you are using a Kodiak disc brake kit like part #K2HR712D for 7K axles…

If you can send me the diameter of the spindle where the grease seal sits and the diameter of the hub where the seal is pressed onto I can verify if we have the correct seal. Currently I do see we carry 2 hubs which use the Inner Bearing #LM67048 and…

I have attached for you a photo that shows the proper sequence to couple and uncouple a Bulldog Collar-Lok Coupler like the part #BD028386. To summarize, see below: To Couple: 1) Block trailer wheels. 2) Align hitch ball beneath coupler. 3) If the…

For your teardrop camper build I recommend the Demco A-Frame Trailer Coupler w/ Jack Hole #DM14791-97 over the Bulldog #BD028386 you were looking at. The latch style of the Demco is much easier and in my own personal opinion a safer design. The…

As long as your Escape travel trailer is going to always weigh less than 5,000 lbs the Bulldog Collar Lok Coupler part #BD028288 is going to work great as this a very reliable and durable coupler style that's easy to use and will last a long…

We've not heard anything about that connector for trailer wiring but that doesn't mean it's not there or that Curt isn't coming up with something for it. I would be inclined to believe that if that was there they would have gone with…

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

We have the Spindle Grease Seal Set for LM67048 Inner Bearing and 2.328 Bearing Buddy #BB60008 that is the only seal that is a fit for your referenced measurements and bearings. I've attached a video to assist.

We have a variety of locks for your coupler, each with their own applications. If you have a fat lip coupler, I recommend the etrailer Trailer Coupler Lock - Flat Lip, part #e98897. This yellow lock can fit a 2" coupler and is an immediate…

The inner diameter of the steel ring of the Spindle Grease Seal Set #BB60008 is 1.25 inches as it will have the same inner diameter as the inner bearing #LM67048 that is rides against like what you currently have. Since you have an inner bearing of…