Result: bug deflector

Hello Kevin, So the answer to this is yes and no, technically. While you do not have to drill any holes through the springs of your 2017 Ford F-350 to install the TorkLift StableLoad #TL89CR, you do have to drill small 1/8" dimples in the…

In regards to the Curt Front Mount Trailer Hitch Receiver part #C52NR which is a fit for a 2022 GMC Sierra 2500, the tow hooks do not need to be removed. I have attached a photo below which shows both the trailer hitch and tow hooks in place. I have…

To haul two kayaks on a pickup truck rack system that does not over hang past the cab, and does not use the hitch receiver you will need a full rack on the bed of the truck. Consider the Erickson #EM07706 truck bed rack that supports 800 pounds!

I talked to some of our guys down in our installation bays and based on the feedback I received, I definitely recommend the Timbren Suspension Enhancement System #TFR350SDJ for your 2020 Ford F-350 Super Duty. The TorkLift StableLoad #TLA7310S work…

Hey Sheila, thanks for reaching out. For your 2011 Ford F-150 XLT I recommend the K-Source Snap & Zap Custom Towing Mirrors #KS81810. These are custom fitted for your truck and they slip over and snap on to the existing mirrors. They have a nice…

For your application I recommend checking out the Global Link RV Entry Door Locking Latch Kit #295-000019. I wasn't able to reference anything to the 3885-66 part you mentioned but you can compare these dimensions with what you currently have to…

Hello Tyler, thanks for reaching out. The T-One Vehicle Wiring Harness #118784 is not recommended for the 2025 Hyundai Santa Cruz. When this harness first came out, the manufacturer stated it would work with all models of the 2025 Santa Cruz. We…

The answer to your question will depend on the nature of the front of the 5th wheel you purchase. It looks like your Coachmen Chaparral has the rounded nose, so you might get by without a slider on flat ground but given the consequences of what could…

We sure can! The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.

Thanks for all of the info on the axle you have on your trailer. Since you have a Dexter 5,200 lb axle with a 6 lug bolt pattern the correct hub/drum you need is the Dexter #K08-201-98.

There is one option that has the right dimensions to replace the Atwood 87891, which is a handle from Stromberg Carlson: - Replacement Crank Handle for Stromberg Carlson Landing Gear #LG-119226 The metal shaft where it attaches to the jack has an…

Yes, the WeatherTech Side Window Rain Guards with Dark Tinting #WT77DD are the correct parts to fit your 2023 GMC Sierra 3500 with the double cab. This comes with everything you need to get the rain guards installed but I do recommend taking it slow.…