Hi Peter; to find the right Air Ride pin box you will need to identify the pin box you currently have on your 2023 Keystone Cougar 320RDS. Start by looking for the sticker. If it isn't directly listed then the LCI number or serial number can be…
Hello Mike, thanks for reaching out. The Curt Air Ride 5th Wheel Pin Box #LC158778 will fit your 2024 Grand Design Influence provided it is currently equipped with the Lippert 1621 or 1621HD pin box. There is no way to look up your camper to know…
Hey Mark, since we know your trailer has two 7k axles and a bolt pattern of 8 on 6-1/2 inch the correct DeeMax disc brake kit would be the part #DE66AR which comes with everything needed to add electric over hydraulic DeeMax brakes to your trailer.
You do NOT have to plug in both the 15-amp and 30-amp male ends to use the Power Grip RV Power Maximizer #CAM55025. You can plug in just the 15-amp or just the 30-amp male end and it will still work. The 30 or 15 amp end not plugged in will NOT be…
Hey Matt, the total weight of the Curt A25 fifth wheel hitch part #C16036 is 147 lbs. The legs by themselves weighs 50 lbs and the head section weighs 96 lb. Are you looking for a lighterweight hitch?
The etrailer.com Electric Trailer Brake Kit #AKEBRK-7-SA and the Dexter Nev-R-Adjust Electric Brake Kit # 23-464-465 referenced in your question are both self-adjusting assemblies that will work to replace the existing Dexter brakes on your 7,000…
MORryde has a cushioned pin box that fits in place of your Dexter 221-0031-00 with the part #MR62VR but the one for a Leland pin box would not work. The bolt holes wouldn't line up properly.
The Curt A16 Fifth Wheel hitch part #C16520-16017 does fit the OEM prep package of your 2023 Ford F-250 long bed. Total it weighs 143 lbs but the individual pieces weigh: 92 lbs for head 51 lbs for legs
The main differences between the Curt A25 5th Wheel Hitch #C16036 and Q24 #C16545-16017 for the OEM prep package in your 2022 Ford F-350 is that the A25 is compatible with a rotating pin box by using a wedge #C16992, where the Q25 cannot be used with…
Hey Jon, It sounds like your trailer is already set up with electric drum brakes and you're seeing the break-away switch/battery, which is a requirement depending on the weight of the trailer. The trailer should have a 7-way connector to plug…
Yes the Hydrastar Disc Brake Kit for 7k axles part #HSE7K-T1SO fits Dexter and LCI/Lippert 7k axles as they use the same spindle dimensions and brake mounting flange dimensions.
Yes, the integrated brake controller of your 2005 Ford F-350 is compatible with the actuator that comes with the Hydrastar Disc Brake Kit part #HSE7K-T1SO that you referenced.
Filters
