Search: bike carrier   >  

We do, the EcoHitch Hidden Trailer Hitch Receiver #306-X7345 is confirmed to fit the 2022 Honda CR-V Touring. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most…

The correct tie-downs for your 2019 Ram 3500 Tradesman short bed depend on your hitch. You can choose from the following: With a factory installed hitch or non-Torklift aftermarket hitch -TorkLift Talon Camper Tie-Downs #TL52XR (front) and #TL34FR…

The only bike racks that have ramps that pull out are 2-bike racks like the Thule EasyFold XT part #TH903202 which would easily have the capacity needed for a 60 lb bike.

It sounds like you need to re-calibrate the zero point on your Lippert Ground Control 3.0 #LC304136 system. Below I've listed out the steps you'll need to follow and will allow you to use the auto leveling again. Zero Point Calibration The…

A great style of bike rack for front hitches is the platform style. This will increase visibility when driving. A great bike rack for this is the Thule T2 Classic 2 Bike Platform Rack #TH9045, its is a great fit with your trailer hitch #65003. Most…

For your 2022 Mitsubishi Eclipse Cross I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver #DT97GR. This hitch has a 2" receiver which is what we typically recommend when available due to it being compatible with the most…

In regards to the Curt Trailer Hitch Receiver part #C11160 which is a fit for a 2011 Mini Cooper, the third brake light will need to be removed if present. The light can be kept for reuse if the hitch is removed and you can simply zip-tie the harness…

There are a few things that can cause bounce with a bumper pull trailer. Generally, bias ply tires would not contribute to trailer bounce, unless they are excessively worn. Trailer bounce is can be caused by worn out suspension components. You will…

The SumoSprings Trailer Helper Springs typically install compressed so they do tend to provide more space between the frame and axle in most cases but not by much and this is not really the goal of the system. If you don't have enough space…

For your application I recommend checking out the SumoSprings Trailer Helper Springs #TSS-107-40 because they are designed for an overslung leaf spring setup and SumoSprings tend to offer more forgiving support so it's more comfortable. This kit…

Yes we do have replacement hardware kits available. Use the Replacement Hardware Kit for Trailer Hitches part #RHK. When ordering it will ask for your hitch part number this will be part #C11391.

The u-bolt included with the Curt Trailer Hitch Receiver part #13555 is a 7/16-14x1-3/4"x1". We don't offer the u-bolt separately but you can replace it with the entire kit, Replacement Hardware Kit for Trailer Hitches part #RHK.