Search: bed rails   >  

What I would do is go out to your truck and measure out 71 inches and 65 inches on a tape measure and compare that to the width of your bed. If you think the 71 inch looks better and would suit your needs then that's what you would want to go…

I always recommend people go with a custom fit rail kit for their truck as they reduce install time and the amount of vehicle drilling required when compared to a universal kit. For your 2013 Ford F-150 short bed I have a great recommendation. For…

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

I do have an install video of the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches part #BWRVK2506 on a similar Chevrolet Silverado 2500 that you can reference but I don't have any tricks up my sleeve to help with…

I sure can! The Lippert 1716 Pin Box #LC1324791 you were looking at measures 36.4" long and 14" tall as shown in the included diagram provided by Lippert.

The distance on center that you want have between fifth wheel rails is right at 22 inches. Typically we recommend you place the rear edge where the installation instructions recommend and then use the fifth wheel hitch to place the front rail. But if…

You can tell if you have overload springs easily. Just take a look at your rear leaf springs, and if you see an extra leaf as shown in the attached drawing you have the overload spring option. The Reese Fifth Wheel Hitch, part #RP30047, will work…

The Reese Semi-Custom Base Rail and Installation Kit, item #RP50140-58, is the correct kit for your 2004 Dodge Ram 2500 Short Bed Pickup and would not require drilling into the frame. In the instructions for the #RP30035-186 kit it states that the…

It is possible to use a weight distribution system and air spring suspension enhancement together in a 2013 Ford F-250 or F-350 Super Duty, though if you are experiencing sag with a weight distribution system, it may not have the proper rating for…

If the trailer tongue in question is 3-1/2 inches round then you can use Bulldog coupler #BD028383. If you have a square or rectangular tongue then a 3-1/2 inch wide straight coupler is not available. You may be able to use a channel bracket like…

The proper location to install the front rail on the Curt 5th Wheel Installation Kit #C16424-204, for your 2016 Ford F-250 is 54-3/16 inches from the rear edge of truck box (to the rear edge of the front rail). This applies to both short and long bed…

I reached out to Du-Ha about the Ice Scraper Attachment #DU70085 and while they did not have a measurement for this part they say it was designed to fit on any standard broom handle, which is 1.13".