Search: axle nut lock   >  

I was looking at purchasing some locking lug nuts, but dont want a unique key for each axle! I | I was looking at purchasing some locking lug nuts, but dont want a unique key for each axle! I...

For the 2200 lb Dexter trailer axle kit it shows axle castle nut , washer , and a lock washer | For the 2200 lb Dexter trailer axle kit it shows axle castle nut , washer , and...

the Replacement 9/16"-18 Lock Nut for Lippert Tandem Axle Lift Kit # LC44UD which could still work for you | do you have a flange nut that is 9/16/18, for a 7200 labs dexter single wheel trailer...

what is your part # for the lock washer used on a Dexter 5200# axle, what is your part | what is your part # for the lock washer used on a Dexter 5200# axle, what is your part# for the lug nuts on the same...

Does axle #7685269 come with spindle nuts and lock washers? | Does axle #7685269 come with spindle nuts and lock washers? | Yes, the castle nut and lock washer for the spindle will be included...

The majority of most axles use either a retaining nut or cotter pin with a "D" washer and castle | I need the axel locking washer for a Haulmark 3500 axel | The majority of most axles use either a retaining...

want to use a channel lock or crescent wrench for the spindle nut on the Trailer Axle # e84YR. | What size of socket do I need for the castle nut on the end of the axle? | There isn't a socket...

and the axle nut is locked with a cotter pin. My question is, can I use this axle beam, reuse my hubs | Hello, Im looking to replace one axle on a 2011 PJ tilt deck with...

What size wrench is used for the axle nut in TASR5200S05? | What size wrench is used for the axle nut in TASR5200S05? | Usually when installing axle nuts like the castle nut that comes with the Timbren Axle-Less...

with a single axle and the hub weight is 1250 each. Thank you. | I am looking to buy locking lug nuts but I am unsure my lug nut sizes. Its for a boat trailer with a single axle and the hub weight is 1250 each. Thank you. |...

The spindle on your Dexter Trailer Axle Beam # T3584F-EZ-8974 will use a 1 inch castle nut with 14 | Looking to see if I can purchase just the castle nut, castle nut washer and castle nut locking nut for the...

The threads of the nuts that come with the Suspension Kit for Tandem-Axle Trailers # AP233 that you | I just bought AP 233 package and a bit surprised there is no means to lock on the nut of the shackle bolt....

Hello I have a 2009 lakota fifth wheel with 6000# lippert axles The bearings are not cone type | Hello I have a 2009 lakota fifth wheel with 6000# lippert axles The bearings are not cone type bearings and appear to be a...

Since the D60 Dexter Axle uses a cotter pin and castle nut the # RG05-100 would not be the correct | I was wondering if this is the correct parts for the Dexter 6K axle spindles.They are the D60 axles. What...

I need to order some wheel lug locks for my 2018 tandem axle Futura trailer. Load capacity is 5678 | I need to order some wheel lug locks for my 2018 tandem axle Futura trailer. Load capacity is 5678 lbs, wheels...

I am looking for the wheel bearing lock or retainer for a Dexter P15 8000lb axle. Would be willing | I am looking for the wheel bearing lock or retainer for a Dexter P15 8000lb axle. Would be willing to buy...

The E-Z Flex Triple Axle Suspension Kit part # K71-657-00 comes with both flange nuts part | Are the nuts provider in this kit lock nuts? | The E-Z Flex Triple Axle Suspension Kit part # K71-657-00 comes with...

with 2 locks and 1 key so this would be one set per axle. | What locking lug nut do I need for size 1/2 th t lug nut? Thx | If you have 1/2" wheel bolts then the wheel lock set that you need is part # RG01-150....

you'll need (4) # KALN1375S per wheel, and (1) # RG01-150 per axle to get you up to 5 lug nuts per wheel | Good morning what stainless lug nuts would be used for these rims including a set of wheel locks.Thank...

Joseph, I reached out to Dexter and they said that the Tandem-Axle Trailer Equalizer Kit for 2 | what are the proper torque specs for the bolts in this kit? how do I assure that the wet bolt and the eye bolt for the spring...

The washers that come with the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift part # LC | the kit does not have any lock washerss, is this because the nuts go on real tight to the bolts that lock...

. You will want new lock nuts, and the correct part is the Replacement Flange Nut for Dexter Axle | Are new. lock nuts required for these replacement 34007-187-00 wet bolts...

the nut and bend outward to lock the castle nut. My axle diameter for the bearings is 1-3/8. Im | Im looking for the lock washer for a 3500lb ez lub axle. Has D shape with...

How do you remove the hub from the axle ? | How do you remove the hub from the axle ? | To remove a hub from an axle, you will need to first remove the grease cap on the end of the hub. This will expose the end of the spindle....