Search: axle kit   >   Anti-Sway Bars   >  

I went ahead and attached a diagram that shows the spacing of the hangers on the 6-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 29-1/2" Long #e46SR. This is the spacing you will use with the Tandem-Axle Trailer Hanger Kit for…

Your Dometic 57915.531 is a 13.5k BTU AC unit which the Advent Air RV AC Unit #ACDOM135 is the same size and is also designed to replace Dometic units.

Yes, it does! The Replacement RV Air Conditioner Cover for Dometic Duo-Therm Item #DMC69FR measures 34-1/2" long x 30" wide x 10-3/4" tall.

The reverse light pin on a traditional 7-way trailer connector, like part #PK11893 or a factory connector if that's what you have on your 2018 Ram, is the center pin. Take a look at the picture I attached that shows all the pin functions. To add…

To add a second axle to your trailer, apart from the axle you'll need another set of hangers that need to be welded on, another leaf spring,four more U-bolts, an equalizer, four more shackle straps, and eight more shackle bolts. You'll have…

You can actually measure the bolt pattern of a wheel in either way that you mentioned. I attached a picture that shows how to measure across center of the wheel to determine the bolt pattern but if you have a 5 lug bolt pattern you can also measure…

The Pintle Hook #C48215 that you referenced does include mounting hardware to attach to a pintle hook plate like the Super Titan Forged Pintle Hook Plate #RP38186 that you referenced. I also pulled these two parts and was able to determine that they…

The adjustment holes on the Super Titan Forged Pintle Hook Plate part #RP38186 are 17/32" diameter so they will accept and are designed to be used with 1/2" bolts. It should not matter what brand pintle hook is used as the hole size and…

The correct axle riser kit for your Lippert Torsion Axle is the part #LC382741. I confirmed with my contact at Lippert that the spacing for the mounting will match up and it is compatible with your mounting holes being on the top.

Thanks so much for the photos, and based on those, your 2018 Liberty Outdoors Little Guy Max travel trailer has a 3,500 lb Lippert square torsion axle, for which we do have the correct lift kit, which is the following: - Axle Riser Kit - Single…

For a ST225/75R15 tire such as the Karrier #AM10303, the diameter is 28.3 inches, or 71.88 centimeters. I have added a link to a help article on measuring trailer tires, as well as a link to each of our 225/75-15 tires.

To determine the correct slipper springs for your tandem axle trailer, the axle capacity will need to be determined. Selecting a spring by length alone could cause the selection to be under or over capacity substantially. If your spring is shaped…