Search: autowbrake trailer brake controller   >  

Hey TJ, I went out and opened up one of the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269 boxes and found that they include a 5/8-18 x 1-1/2" fine thread grade five bolt. I then called Lippert and they…

The Autowbrake #3430001 installs on the trailer side so you would generally just utilize the 7 way plug already on the trailer. We do recommend using a junction box to connect the Autowbrake wiring harness. We actually make an installation kit…

In order to charge an on-board trailer battery you'd need to have a seven way connection on both the vehicle and trailer, this would contain the necessary circuits to pass a charge from the vehicle battery to the trailer battery. If you don't…

I've attached a wiring diagram for the 7-Way Molded Trailer Wire Connector #H20044, however there is no guide available to tell us the wire color functions on the trailer so you'll have to test each wire in order to determine its function. If…

The Autowbrake brake controller part #3430001 that you referenced draws up to 15 amps. It's only going to draw amperage when the controller is activating the trailer brake so it would not be something you'd need to install an on/off switch on…

As long as your trailer has a 7-way you will more than likely have a Junction Box #3375601101 that all the wiring from the 7-way will go into and connect to the trailer wiring. You will need to locate this box and find the wire for the reverse light…

Hopkins does a very good job of constructing their molded 7-way trailer connector pigtails for durability, I can highly recommend part #H20044, which is 6 feet long. The best way to connect this to existing wiring is to use a junction box like…

The Buyers Products Trailer Wiring Junction Box #3375601101 referenced in your question measures 6.5 inches long, 3.21 inches wide, and 2.5 inches tall when the cover is installed. The mounting holes at each end are spaced apart 7.38 inches on…

We have the etrailer hub part #AKHD-865-7-2-EZ-K which matches the bearings, bolt pattern, and is pre-greased like you are wanting as well.

For your 2018 Subaru Outback Wagon, the best electric trailer brake controller is the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR. This is simply due to the sleek design and factory look. If you don't care about the factory look, then…

You can install a 7-way connector on your 2019 Subaru Outback since you plan on towing with the Draw-Tite Hitch #76227, and to do so you'll need to start with a 4-way connector, the T-One Vehicle Wiring Harness #118467. This will simply plug into…

To convert the 4-way of your 2018 Jeep Renegade to a 7-way all you'd need is the install kit part #ETBC7 with a brake controller like the part #TK63VR and you'd be set. The ETBC7 comes with everything needed to convert to the 7-way as well as…