I checked with Aluma and they list a 14" Liger Wheel and Tire 60-0001396 as a replacement 14" wheel for their trailers but they do not specify the finish. We do have one 14" Liger Wheel item #LH84FR. It is gunmetal gray and has a 5 on…
We do offer all sorts of trailer lighting, including fender-mount types such as #BA44FNL and #BA44FNR which are combination red/amber lights. We also have #MCL61ARB. These and all other red/amber lights are shown on the linked page. If you cannot…
You'll have to get me the bolt pattern and tire size that is stamped on the sidewall of what you currently have on your trailer for me to determine what the correct spare would be.
Thanks for the information! The wheel part number 60-0000460 you provided for your 2016 Alma 638LW trailer shows as a 175/80R13 tire and wheel with the 5 on 4-1/2" bolt pattern so the Westlake ST175/80R13 Radial Trailer Tire w/ 13" Silver…
I don't offer anything specifically designed for your situation, with the low sidewalls (more of a lip, really) on your Aluma 6810. You could use something such as the CE Smith #CE27310G but you'd need to devise your own way to mount it to…
To measure the width of a trailer wheel you will measure from where the tire beads will seat on the wheel. That will be from the inside of the inner wheel flange to the inside of the outer wheel flange, not from edge to edge of the wheel. To measure…
If the Kenda Karrier S-Trail ST145/R12 Radial Tire #AM10140 and the 12" Aluminum Wheel #LH45FR with 5 on 4-1/2" bolt pattern matches up with what you have now, then it will be a direct fit replacement. If it does not, then you will need to…
Wheel torque specs vary based on stud diameter, wheel diameter and wheel material. The linked chart shows you commonly recommended torque specs for a range of studs and wheels. For 1/2-inch wheel studs and a 14-inch steel trailer wheel you will use a…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
While we do have a variety of winch mounting options, I can't say for certain that any of them are a specific replacement for your Aluma Series 82 car trailer. With that being said, we do have a universal winch mounting plate as part #BDW20291…
A TruRyde rvd-h-865 7k hub/drum like # AKHD-865-7-2-K uses 1/2-inch drive-in studs that are 1-5/16-inches long. For a replacement stud you can use #165981. This is slightly longer at 1-1/2-inches but it has the same 1/2-inch diameter. They are also…
The 3-1/4 inch diameter hole to install the part #RR5K is the correct dimension to use. We actually even had a customer come back and say they did it with a 3 inch hole saw. I attached a link to the install video you mentioned as well.
Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair.
Filter Results
