Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…
view full answer...According to my research the CellTech trailers looked to have vertical etrack installed directly to the walls, but since you're trailer has the honeycomb paneling that isn't solid all the way through you'll need to install some studs to…
view full answer...E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…
view full answer...The mounting holes on the E-Track such as #E19148 are 1/4 inch in diameter. The type and length fastener you use will depend on the surface material and thickness you are attaching it to. For example if your surface was ACQ treated wood you could use…
view full answer...Axles rated for 6,000 to 7,200 pounds usually will have 3 inch diameters. But it is possible for 5,200 pound axles or even 3,500 pound axles to have a 3 inch diameter axle. You could err on the side of caution and say each axle is rated for 3.5K for…
view full answer...Since we don't have the 94 inch long e-track in sets of 6 you'd have to order them individually with the part #e65VR which the price for these is available at the link below.
view full answer...The Erickson E-Track is very versatile so they isn't a specific size or model for your 5 x 8 Haulmark Transport Deluxe Cargo Trailer, just install as much or as little as you want, on the deck or on the wall. I have included a link to all of the…
view full answer...Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…
view full answer...For a 3500 lb Electric Jack, I recommend the Bulldog Powered-Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 3,500 lbs - Black #BD500187. This jack uses a 12 volt system, so it is compatible with your 7-way although a battery is always a…
view full answer...The trailer jack should very much NOT be powered by the breakaway battery. That was likely done by the previous owner for convenience. The breakaway battery is a dedicated battery for the breakaway system only. It needs to be able to apply the…
view full answer...It is a simple switch, so brand compatibility should be a non-issue. When the pin is pulled, two pins are allowed to contact and complete the circuit to engage the brakes. Any switch should work fine. I pulled the Hopkins Switch, part #HM20010, to…
view full answer...Erickson does offer a zinc-plated steel backing plate for use with their E-Track products like their ATV E-Track Tie-Down Kit #EM09160. Use part #e96RR. You can see this item's hole dimensions and spacing in the linked photo. Since your trailer…
view full answer...