Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
You would know to replace brake shoes the same way you would know with a vehicle. If performance is suffering and adjusting the brakes does not help and there are no other issues causing the poor performance it is probably time to change the brake…
view full answer...The Rockwell American 4704-L and R brake assemblies that you have are standard 12 inch by 2 inch trailer brake assemblies that we do offer replacements for like with the Electric Trailer Brake Assembly - 12" - Left Hand - 5,200 lbs to 7,000…
view full answer...The closest replacement options we have available to the drop center torsion axle currently installed on your EZ Loader Boat Trailer is going to be an Axle-Less System from Timbren. The Timbren Axle-Less Trailer Suspension System #A35RS545E might be…
view full answer...We have the bearings and seal that you would need, but they are not available in a kit. For bearings you would want the #L44649, for races part #L44610, and then for a seal you would need part #13194. I attached a help article on replacing bearings,…
view full answer...We do offer a similar P2 light that is LED. I recommend the GloLight LED Trailer Clearance or Side Marker Light - Submersible - 6 Diodes - Round - Amber Lens Item #MCL155AB. For the 30 series I recommend the Miro-Flex LED Clearance or Side Marker…
view full answer...The 2057 and 1157 bulbs are interchangeable with the difference being the brightness. The 1157 is just slightly brighter than the 2057. For a replacement 1157 we have the #A1157B which would work great and would be your best option.
view full answer...Your statement (I have heard others say that you should never mix marine grease with general purpose grease, but mixing different brands of marine grease wont hurt.) sums up the way I have used grease all of my life. Being raised around all kinds of…
view full answer...Shocks such as #DS12426 on brake actuators don't have a native, relaxed positioned. They will stay in place until acted upon by an outside force. You will know your shock is good if it is very difficult if not impossible to push in and pull out…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…
view full answer...In order to mount the Demco 18K Hijacker Autoslide 5th Wheel Trailer Hitch part #DM8550022 in the bed of your 2011 GMC Sierra 2500 you will need to use the Underbed Rail and Installation Kit for Demco Hijacker Hitches part #DM8551010. The Replacement…
view full answer...The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…
view full answer...Filter Your Search
Contact and Help