Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
You are doing the right thing by doing the research first. There is a lot of conflicting information out there so let me break it down for you and I will provide some part recommendations at the end. Basically, if you want to tow a 5th wheel…
view full answer...The only lift kit we offer for this application is the Correct Track Trailer Alignment and Lift Kit part #RR23QX which is basically a leaf spring hanger extension that will provide a lift of 1-1/4" or 2-1/4". It can be used with…
view full answer...We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the…
view full answer...The Correct Track Trailer Alignment and Lift Kit #RR23QX will allow you to lift your 2021 Keystone Cougar 24RDS 1-1/4" or 2-1/4". This will bolt to your current leaf spring hangers and move the suspension mounting points further…
view full answer...Yes, the Tandem Axle Lift Kit part #RR23QX is the solution to your problem which is to raise the trailer in order to sit level with the tow vehicle. This problem is actually very common nowadays as trucks continue to sit higher and higher which is…
view full answer...It is possible to mount the springs on top of the axle which is called "flipping the axle". To accomplish this we normally recommend an over-under conversion however there is not one with square u-bolts available for your square…
view full answer...The previous generations of the Correct Track had some issues with brackets bending but the current generations like the single axle part #LC87120 and tandem axle #RR23QX have had all of that addressed and fixed.
view full answer...The widest tire size that fits a 12 inch wheel is the 145/80-12 like the part #AM10140 which has a section width of 5.7 inches. This will be right at an inch wider than what you currently have.
view full answer...Thank you for providing that picture. It is true that your typical #11 Torflex axle has a capacity of 4,100-6,000 lbs. However, your axle is in fact a #11 Torflex despite the 3,500 lb capacity. This was confirmed by Dexter. The correct lift kit for…
view full answer...The ID and Password you need to link your Lippert Ground Control 3.0 item #LC675817 system to the app on your phone can be found on the gateway inside your 2021 Cougar 290RLS. You have the antenna to connect wirelessly but if you don't have the…
view full answer...Pin box bolt torque is based on the size of the bolts. 1/2 inch Bolts GR5 90 ft-lbs 5/8 inch Bolts GR5 150 ft-lbs 3/4 inch Bolts GR5 275 ft-lbs
view full answer...MORryde has a version of the X-Factor Crossmember that was designed to work with the CRE3000 you have with the part #MR33WR.
view full answer...Related Searches
Filter Your Search
Contact and Help