Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...If you're wanting to add a 4-way to power your trailer's signal lights then you need the Curt #CU94FR. If you want to add a 7-way to your 2024 Santa Cruz then you can use the Curt #C68JR. Both of these plug into the tow package you referenced…
view full answer...There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
view full answer...Curt hitches like the Class II designed for the Toyota Camry, part #C12107 require the stability strap, part #18050 as part of the warranty. Beyond that, the stability strap is one of the easiest ways to improve the performance of any non-trailer…
view full answer...The best trailer hitch receiver option for your 2023 Audi A4 Allroad comes from Stealth Hitches and they have 2 different kits available depending on what you plan to use the hitch receiver for: - Hidden Rack Receiver #391AUDA417 (for bike rack and…
view full answer...It sounds like your current 7-way is attached to the factory hitch of your 2014 Ford F-250 that you will be replacing with the Curt #C14355 and are looking for a way to relocate the 7-way. One solution would be the part #PK12711U that you referenced…
view full answer...You are correct that the Jeep bracket should have been reinstalled when installing the Blue Ox Base Plate #BX1139. I have linked another video near the bottom of the page where you can see the brackets being reinstalled on a 2020 Jeep Wrangler around…
view full answer...Yes, you are going to be able to reinstall the removable bumper cover after you install the Draw-Tite Trailer Hitch Receiver #DT42GR on your 2023 Jeep Grand Cherokee.
view full answer...If you want to add a brake controller to your 2024 Santa Cruz you have to start by adding a 7-way. Since you have the factory tow package you can use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package #C68JR. This plugs into the tow…
view full answer...Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…
view full answer...Filter Your Search
Contact and Help