Result: Trailer Fenders

Good morning, Ben! To mount trailer fenders you'll want to use mounting brackets like the Kit #CE26098G-2 or you can have them welded to your trailer. Then, as far as the style goes, the backing plate model #HP97FR basically offers an extra level…

There is a flange on the Tandem Axle Trailer Fenders w/ Backing Plates #HP82VR that overlaps the backing plate that you'll use for the welding surface. When it comes to welding, we always recommend having this done by an experienced welder.

The Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs #20545I-EZ-60-15 is a great starting point to upgrade your trailer. This will give you a standard size axle with good bearings, hubs, and EZ-lube…

We do carry an 89" long axle with a 74" spring center. We have the #e53GR which is a 3,500 lb axle with a 4" drop. We also have the #e38GR which is a straight axle beam with no drop. We also have the disc brake kit #KOD59FR. This kit…

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

The Single Axle Trailer Fender #HP56VR is made of 14 gauge steel and has one edge that is a 90 degree angle to weld it to your trailer and the other has a more rolled edge. The strength of the fender and ability to hold 200 lbs is based on your…

I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…

Thanks for the information on your trailer. For your axle with brakes I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 #AKHD-655-6-EZ-K if you have the spindles with the integrated grease…

Thank you for the photos! According to my information and what you sent in, your best option for a replacement fender is the CE Smith Black Fender: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - #CE19503 (Qty 1) CE Smith Single Axle…

Hi Matthew; the correct wiring harness for your brake controller port and the Curt Venturer is the Curt Custom Wiring Adapter for Trailer Brake Controllers #C51455. Keep in mind, this is a time-delayed brake controller so the trailer brakes apply at…

I do not have instructions, but I can explain how the fender brackets are used. The mounting brackets slide into the underside of the step on either side of the fender with the open end of the bracket facing downward. The fender secures to the…

Hey Richard, thanks for reaching out! The Tandem Axle Trailer Fenders w/ Backing Plates #HP32VR measuring 72" long x 9" wide x 20-1/2" tall is the closest thing that we have to those exact dimensions. These fenders are designed for…