My Vehicle:change vehicle

 Trailer Jack Socket   x   >  

Filter Results

Ultra-Fab Speed Socket Power Drill Adapter for Scissor Jacks

Our Price: $10.19


  (50)
Designed to work with most scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. Works with 3/8" drill Features: Socket lets you use a power drill (not included) to speed up extension and retraction of scissor jacks Eliminates manual cranking Works up to 10 times faster than hand cranking Easy

 Trailer Jack

 Camper Jack

 Electronic Crank

 Ultra-Fab Products

 Value

Drill Adapter for Atwood Direct Drive 5th Wheel Landing Gear

Our Price: $8.41


  (15)
Drill adapter lets you extend and retract your Atwood direct-drive fifth-wheel landing legs. Also works with jacks that use an Acme screw. Features: Drill adapter lets you extend and retract your Atwood 5th-wheel landing gear Fits direct-drive landing gear Also works with Acme-screw jacks 85385 Drill Adapter for Atwood Direct-Drive

 Trailer Jack

 Camper Jack

 Electronic Crank

 Atwood

 Value

Replacement Plug for Side Hand Crank Socket on Stromberg Carlson Electric A-Frame Tongue Jack

Our Price: $9.06


  (1)
Replace 1 rubber plug for the crank handle sockets on your Stromberg Carlson electric tongue jack (JET-3500; sold separately) with this part. The plug fits into the socket on either side of the jack. Features: Replaces the plug for the manual crank handle socket on your Stromberg Carlson electric A-frame tongue jack (JET-3500; sold separately) Fits into sockets on either side of jack Includes 1

 Trailer Jack

 Camper Jack

 Plugs

 Hardware

 Stromberg Carlson

 Value

Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w/ Touchpad and Remote - 20,000 lbs

Our Price: $2,797.75


  (9)
Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. Precise, motorized jacks can be operated by either the included touchpad or the touchscreen remote. Hitch the jacks individually can result in damage to your trailer's frame. Ground Control has built-in twist prevention so that you won't have to worry about twisting and damaging your frame. In addition

 Leveling Jack

 Stabilizer Jack

 Leveling System

 Electric Stabilizer

 20000 lbs

 Lippert Components

 Bolt-On

 Premium

Ultra-Fab Electric A-Frame Jack w/ 7-Way Plug - 18" Lift - 3,500 lbs

Our Price: $148.33


  (51)
Plug this 12V jack into your 7-way trailer connector for power and get quick, simple lifting. Corrosion-resistant, die-cast aluminum cap and hardened steel gears make for a long-lasting jack. Dual prevents motor damage All-steel gears are strong and durable 7-Way RV-style plug pulls power from your vehicle's trailer connector Great for trailers without batteries No need to manually wire for power

 A-Frame Jack

 Standard A-Frame Jack

 3500 lbs

 Electric Jack

 Ultra-Fab Products

 Bolt-On

 Weld-On

 No Drop Leg

 2 Inch

 Bolt-On

 Weld-On

 With Foot

 Economy

Ultra-Fab Electric A-Frame Jack - 18" Lift - 3,500 lbs

Our Price: $137.02


  (92)
Easy-to-use jack has 12V motor for quick, simple lifting. Corrosion-resistant, die-cast aluminum cap and hardened steel gears make for a long-lasting jack. Dual side lights help you to set up camp Features: Tongue jack positions quickly and easily 12V Motor powers jack, eliminating need for hand cranking Built-in, water-resistant toggle switch for easy operation Integrated circuit breaker

 A-Frame Jack

 Standard A-Frame Jack

 3500 lbs

 Electric Jack

 Ultra-Fab Products

 Bolt-On

 Weld-On

 No Drop Leg

 2 Inch

 Bolt-On

 Weld-On

 With Foot

 Economy

Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black - 2" Ball - Bolt On - 10K

Our Price: $84.12


  (43)
A-frame coupler is made of sturdy steel and has a durable black powder coat finish. eZ-Latch ensures fast, easy, secure hookup and disconnect. Top plate has a cutout for your 2-1/4" round jack the coupler over your trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure

 2 Inch Ball Coupler

 Standard Coupler

 Bolt-On

 10000 lbs GTW

 Demco

 Value

Phoenix Electric Trailer Jack - A-Frame - 22-1/2" Lift - 4,000 lbs

Our Price: $250.05


  (4)
This electric A-frame jack has a durable, super-efficient ball screw and a memory function for fast, easy setup. The built-in LED light provides simple nighttime operation. Offers 18" of travel longevity. Manual Override Feature An important feature with any electric jack is the manual override option. The Phoenix electric trailer jack is equipped with a 9/16" deep well socket that can be used

 A-Frame Jack

 Standard A-Frame Jack

 4000 lbs

 Electric Jack

 Ultra-Fab Products

 Bolt-On

 No Drop Leg

 2-1/4 Inch

 Bolt-On

 With Foot

 Premium

Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Silver - 2" Ball - Bolt On - 10K

Our Price: $74.32


  (43)
for your 2-1/4" round jack. Bolt-on installation. A-Frame Trailer Coupler with Easy Latch and Jack Hole - Silver - 2" Ball - 10,000 lbs

 2 Inch Ball Coupler

 Standard Coupler

 Bolt-On

 10000 lbs GTW

 Demco

 Value

Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Primed - 2" Ball - Weld On - 10K

Our Price: $80.91


  (43)
plate has a cutout for your 2-1/4" round jack. With this mechanism, hooking up is as easy as dropping the coupler over your trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have

 2 Inch Ball Coupler

 Standard Coupler

 Weld-On

 10000 lbs GTW

 Demco

 Premium

Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - Bolt On - 21K

Our Price: $95.54


  (3)
2-1/4" round jack. Bolt-on installation. of a durable composite material that's corrosion-proof, allowing it to withstand whatever the road and the elements dish out. 13205-95 Demco A-Frame Trailer Coupler with Easy Latch and Jack Hole - Zinc -

 2-5/16 Inch Ball Coupler

 Standard Coupler

 Bolt-On

 21000 lbs GTW

 Demco

 Premium

Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Primed - 2-5/16" Ball - 21K

Our Price: $51.28


  (9)
Cutout in plate fits 2-1/4" round jack. 12660-97 Demco 50-Degree A-Frame Trailer Coupler with Easy Latch and Jack Hole - Primed - 2-5/16" Ball - 21,000 lbs Replaces 12661-97

 2-5/16 Inch Ball Coupler

 Standard Coupler

 Weld-On

 21000 lbs GTW

 Demco

 Value

Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2" Ball - Bolt On - 10K

Our Price: $81.52


  (43)
for your 2-1/4" round jack. Bolt-on installation. is constructed of a durable composite material that's corrosion-proof, allowing it to withstand whatever the road and the elements dish out. 14793-95 Demco A-Frame Trailer Coupler with Easy Latch and Jack Hole

 2 Inch Ball Coupler

 Standard Coupler

 Bolt-On

 10000 lbs GTW

 Demco

 Premium

Demco 32-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Black - 2-5/16" Ball - 21K

Our Price: $89.97


  (2)
to disconnect. Cutout in plate fits 2-1/4" round jack. trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure that the coupler is properly

 2-5/16 Inch Ball Coupler

 Standard Coupler

 Weld-On

 21000 lbs GTW

 Demco

 Premium

Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Primed - 2-5/16" Ball - 21K

Our Price: $59.90


  (2)
to disconnect. Cutout in plate fits 2-1/4" round jack. which allows for easy welding, has a 500-hour salt spray rating, making the coupler perfect for marine use. 15337-97 Demco 50-Degree A-Frame Trailer Coupler with Easy Latch and Jack Hole - Primed -

 2-5/16 Inch Ball Coupler

 Standard Coupler

 Weld-On

 21000 lbs GTW

 Demco

 Value

A-Frame Trailer Coupler w/ Square Jack Hole - Squeeze Latch - Black - 2-5/16" Ball - 15,000 lbs

Our Price: $60.97


  (2)
A-frame coupler features a squeeze latch for safe, easy hookup. Squeeze both levers on latch to open ball socket. Jack port lets you mount a square trailer jack. Features: A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Squeeze latch allows for safe and easy coupling and uncoupling Remove pin

 2-5/16 Inch Ball Coupler

 Standard Coupler

 Weld-On

 15000 lbs GTW

 etrailer

 Value

A-Frame Trailer Coupler w/ Round Jack Hole - Squeeze Latch - Black - 2-5/16" Ball - 15,000 lbs

Our Price: $59.35


  (1)
A-frame coupler features a squeeze latch for safe, easy hookup. Squeeze both levers on latch to open ball socket. Jack port lets you mount a round trailer jack. Features: A-frame coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Squeeze latch allows for safe and easy coupling and uncoupling Remove pin

 2-5/16 Inch Ball Coupler

 Standard Coupler

 Weld-On

 15000 lbs GTW

 etrailer

 Value

Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Silver - 2-5/16" Ball - Bolt On - 21K

Our Price: $99.31


for your jack. Bolt-on installation. and the elements dish out. 13205-52 Demco A-Frame Trailer Coupler with Easy Latch and Jack Hole - Silver - 2-5/16" Ball - 21,000 lbs

 2-5/16 Inch Ball Coupler

 Standard Coupler

 Bolt-On

 21000 lbs GTW

 Demco

 Premium

Demco 32-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Silver - 2-5/16" Ball - 21K

Our Price: $87.77


to disconnect. Cutout in plate fits 2-1/4" round jack. trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure that the coupler is properly

 2-5/16 Inch Ball Coupler

 Standard Coupler

 Weld-On

 21000 lbs GTW

 Demco

 Premium

Demco 32-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Primed - 2-5/16" Ball - 21K

Our Price: $77.90


to disconnect. Cutout in plate fits 2-3/8" round jack. a collision. The handle is corrosion-proof, allowing it to withstand whatever the road and the elements dish out. 15633-97 Demco 32-Degree A-Frame Trailer Coupler with Easy Latch and Jack Hole - Primed -

 2-5/16 Inch Ball Coupler

 Standard Coupler

 Weld-On

 21000 lbs GTW

 Demco

 Premium

T-One Vehicle Wiring Harness with Upgraded Circuit Protected ModuLite HD Module - 4-Way Flat

Our Price: $60.68


  (96)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Powered Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects

 Custom Fit

 3 Wire System

 Trailer Hitch Wiring

 Tekonsha

 4 Flat

 Powered Converter

 Premium

Ultra-Fab Electric A-Frame Jack - Drop Leg - 18" Lift - 4,000 lbs - 2" O.D.

Our Price: $230.08


  (13)
any A-frame trailer tongue. Features: Tongue jack positions quickly and easily with integrated drop leg 12V Motor powers jack, eliminating need for hand cranking Built-in toggle switch for easy operation Integrated circuit

 A-Frame Jack

 Standard A-Frame Jack

 4000 lbs

 Electric Jack

 Ultra-Fab Products

 Bolt-On

 Weld-On

 Drop Leg

 2 Inch

 Bolt-On

 Weld-On

 With Foot

 Value

Ultra-Fab Odyssey Electric A-Frame Jack - 18" Lift - 3,000 lbs - Black

Our Price: $198.22


  (1)
Easy-to-use, powered jack includes durable steel gears, emergency crank socket, built-in circuit breaker, water-resistant toggle switch, and large front light for simple nighttime operation. Emergency, ratchet-style crank socket 9/16" Deep well socket inserts into end of drive collar - ratchet clockwise to retract, counterclockwise to extend Easy bolt-on installation for A-frame trailers

 A-Frame Jack

 Standard A-Frame Jack

 3000 lbs

 Electric Jack

 Ultra-Fab Products

 Bolt-On

 No Drop Leg

 2 Inch

 Bolt-On

 With Foot

 Value

Atwood Stabilizer Jack - 6-1/4" Drop Leg Travel - 17-3/4" Ext - Black - 650 lbs - Qty 1

Our Price: $24.19


  (101)
Heavy-duty jack stabilizes your lightweight cargo or camper trailer. Leg telescopes to the ground when you release the lever. Jack swings up for storage. Bolt-on or weld-on installation. Features: Stabilizing jack helps keep your trailer or pop-up camper level and steady Great for loading and unloading cargo or for camping Folding design lets you swing jack up for travel, down

 Stabilizer Jack

 Drop Leg Jack

 Swing Down Jack

 650 lbs

 Drop Leg Stabilizer

 Swing Down Stabilizer

 Atwood

 Bolt-On

 Weld-On

 Bolt-On

 Weld-On

 Economy




< Previous    
1   2   3   




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.