Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hi Chet, Both Timbren And SuperSprings SumoSprings jounce springs would help with the sagging you're experiencing, but only one is going to give you a comfortable ride quality. You'll want to stay around the payload capacity of your 4Runner…
view full answer...While the Curt Hitch Extension #C45048 can be used for bike racks, it is also designed to fit into 2-1/2" hitch receivers and then create a 2" hitch. If your hitch on your popup camper is 2", then this extender will not fit on it. We…
view full answer...Hello again, James. We will need to consider a different approach here because the Timbren Silent Ride Suspension like part #TSR3500S05 cannot be used with torsion axles. In order to use the Silent Ride you would need to completely replace both…
view full answer...There is no difference between buying two of the Single Kits #SSR54FR or a Dual Kit #SSR44FR. You would end up with all the same components, we just simply created the dual kit to make it easier since several RV's now come with at least 2…
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…
view full answer...I do have an option for you but roof rails won't work very well on a teardrop trailer, even if you were able to get the rails to conform, it's likely the accessories would bind due to the steep angles. Instead, you will need to use artificial…
view full answer...You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…
view full answer...Yes, the Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter #C32DR will work with the OEM puck system on your 2016 Ram 2500. Do understand since you do have the short bed you will likely not be able to make full jackknife turns…
view full answer...You could use a Timbren suspension enhancement kit like the part #T92MR for if you have underslung axles or part #T46GR for if you have over slung. These attach to the spring pack/axle and provide additional support. Your axle would need to be…
view full answer...The 205/75-15 Tire and Wheel Combo, #AM32395, is 8.1 inches wide and 27.3 inches tall. An F78-14 tire and wheel will be about the same width but it will be 1 inch shorter. I have included a link to a tire size FAQ article that should help.
view full answer...Yes we do have a set of Timbrens that fit your 2024 Toyota Tundra with the part #T45MR. These can give you up to an additional 6,000 lbs of suspension support.
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…
view full answer...Related Searches
Filter Your Search
Contact and Help