Hi Forrest; because of the way an agricultural 7-way is wired the #PK12-724 is not a good solution. The best thing you can do is run a 7-way blade and connect straight to the trailer. Right now you don't have a brake output pin and it sounds like…
For the right hand side 18-3/8 inch long equalizer for 2-1/2 inch wide slipper springs you can use #13-140-3. It can actually be used as a left or a right.
In this situation, most folks either replace the safety chains, using a hook that will fit. Another option would be to use a quick link, like #C82932. Attach the quick link to the safety chain hole in the hitch, then attach the safety chain hook to…
The trailer tire and wheel combination like the Castle Rock ST205/75R14 Radial Tire w/ 14" Condor Aluminum Wheel - 5 on 4-1/2 - LR C - Gunmetal #LH84VR, is received from the supplier already with the tire mounted on the wheel. The supplier does…
I spoke to Dexter and they said there is a bit of a process for installing the spindle nut properly. 1. You will need to thread on the inner nut, rotate the hub, then tighten the nut to 100 foot pounds. 2. Loosen the nut to remove the torque, making…
The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…
Based on what you mentioned and the diameter you are looking for the best option is a wheel and tire in the size 4.80/4.00-8 with a bolt pattern of 5 on 4-1/2 inch like the #AM30060. The overall diameter of this is 16.1 inches (smallest diameter…
Thank you for all of that information; it definitely makes it easier to identify the appropriate parts, and it looks like you were on the right track. If your boat and trailer weigh less than 1000-lbs total, the UFP Slipper Spring for 1000-lbs Axles…
From what I was able to find it looks like your Husky/Valley 7054 sliding 5th wheel hitch installs on industry standard rails which means you can use the adapter #RP30156 if your 2019 Ford F-350 will have the OEM puck system, or you can use the Reese…
Yes, you can use the Valley 7054 5th Wheel Hitch on your 2018 Ford F-150. There won't be any issues with the aluminum bed. In order to do so you will need an install kit for which I recommend using the Reese Quick-Install Custom Installation Kit…
This Miro-Flex, Waterproof, Rectangular, LED Trailer Stop/Turn/Tail Light #STL35RB that you referenced should work well with your trailer wiring. You will need a Straight 3-Wire Pigtail #A45PB to wire it into your trailer wiring. The red wire from…
You are describing a spindle like #TRU37FR but it uses a tang washer, not a cotter pin because of the grease fitting. The problem is that aftermarket spindles are under rated compared to the OEM counterparts. This is actually not a bad thing because…
Filter Results
