Search: Stabilizer Jacks   >   Anti-Sway Bars   >  

For a jack that is similar and has a bolt-on installation I recommend the Trailer Valet JXS Trailer Jack w/ Footplate #TV64FR. This is a sidewind swivel jack with a 5,000 lb support capacity that fits a frame up to 4-3/4" tall x…

If you look at the photo I edited for you, you will be able to see all the dimensions of the mounting tabs on the top of the Ultra-Fab #UF48-979006 Scissor Jack.

The Ark stabilizers won't affect your ground clearance, but to determine the right ones that really depends on how high up your frame is off the ground. Overall, the Ark RV Stabilizer Jacks #ARK34FR are 16.6" collapsed and…

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer…

The physical weight of the Lippert Components High-Speed Power Stabilizer Jack part #LC298707 is around 65 lbs. However, if you were instead referring to the weight capacity which is also another common question we get then I do no not have a…

Yes, we do. To replace your Coleman Mach AC unit model #48254C969 you will want the Furrion Chill HE Replacement RV Air Conditioner for Coleman Setup - Black item #FR32PV or item #FR42PV for white. These are equivalent 15,000 btu units that come with…

I do have an RV trailer hitch receiver that may work for you in the Adjustable Width Trailer Hitch Receiver part #13703. The hitch receiver will fit trailers with frame rails from 22" to 72" apart. The frame brackets sit about 3" down…

The DeeZee Specialty Seres Tongue Toolbox measures 36 inches(back) x 18 inches(front) x 19-1/2 inches wide x 17-3/4 inches tall, and has a lockable hasp. This is designed to be able to sit on a trailer tongue and has the hardware included. From my…

The Replacement Inner Slide Channel for Dexter Model 6 #T4846500183 has a shank that measures 3" wide x 2-1/2" tall to it's a little smaller than the 3" square shank that comes on the Replacement Inner Slide for Demco DA91…

I have a solution for you, but the main issue with puck style lights that mount to the surface of your RV ceiling or under cabinets, is that there aren't replacement bulbs available and they aren't really designed to have the bulbs replaced.…

The Stabilizer Jacks #TJ01RT-HD you were looking at are what I would recommend for your cargo trailer. These are simple but effective and at a great price. The support capacity per jack is 1,000 lbs which will be fine for your trailer since they…

Hey Rich, that is a really good question. The short answer is, no, you do not need to go relocate your jack. According to the manufacturer, mounting the jack on the middle rail allows it to more evenly distribute the weight of the trailer, making it…