Search: Solar Battery Charger   >  

I checked the instructions for the Bright Way Switch Mode Battery Charger for Hydraulic Lift and Dump Trailers part #BRW77FR and they show that if you have three of the four lights illuminated, this indicates the battery is good and the system just…

Hey Sean! As long as you don't have anything placing a draw on the Bright Way Solar Battery Charger #BRW54FR, and the 4-6 hours of sunlight is unrestricted then this kit will be just fine for keeping your Group 24 battery topped off.

You would want to go with a deep cell battery. Having a battery larger than you would need would be the way to go as having a battery that is similarly rated as the draw of the winch will drain it quickly. We don't carry any deep cell batteries…

For a 12,000 lb. electric car trailer winch like the Bulldog Winch Trailer Winch part #BDW10040, I recommend a standard 12 volt lead acid battery rated up to at least 650 cold cranking amps (CCA). As long as the battery is rated up to 650 CCA then…

Although none of the trailer tongue toolboxes we offer precisely meets the measurements you provided, we have options that could work for you. The most obvious choice and what I'd recommend would be the UWS #UWS01039 box you'd looked at. At…

The best way to secure a vehicle to trailer is with a wheel net. This takes the guess work out of finding tie-down points on the vehicle and it's the most secure method. The easiest option would be to install e-tracks like the etrailer Horizontal…

Ideally you'd want the anchor points for a wheel net like the SmartStraps #348851 to be in-line with the wheel, but since these are rated for 3,333 lbs (each) and you're using them for a Jeep you'll be perfectly safe to install them…

I have a couple options for you as the SmartStraps Ratcheting Wheel Net with Snap Hooks #348851 will not fit your 33" tire. The ProGrip Adjustable Wheel Net with Ratchet and Snap Hooks #317-18900 are designed to fit a tire up to 12-1/2"…

When wiring a trailer connector, it is best to wire by function, as wire colors can vary. We have an excellent wiring diagram on our website, I will provide you a link so you can look at it. If you are looking at the inside of the trailer connector…

You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…

I recommend the Stromberg Carlson Electric Trailer Jack #JET-5000. It has a 5,000 pound lift capacity, 3 lights, and great reviews.

The Bright Way Solar Battery Charger and Maintainer - 12 Volt #BRW54FR is 9" long x 10-1/2" wide x 1/8" deep.