Result: ST145R12

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

The best thing you can do is switch to a Radial Tire #TT48012C if you do not already have them on your trailer. The radial construction is superior to the bias construction on roadways. The radial tires do not heat up as much as bias tires which…

Yes, the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10140 referenced in your question will fit the same 12 inch wheel with a 4 inch width that your existing 4.80-12 size tires are mounted to. Just note that the ST145/R12 tire will be…

The smallest diameter 13 inch trailer wheel and tire will have a diameter of 24.1 inches (ST175/80-13). There are 3 common 12 inch trailer tire sizes: 4.80-12 has a diameter of 20.5 inches, 5.30-12 has a diameter of 21.9 inches, and 145/80-12 has a…

Hello Justin, Yes, we do have some options with the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E #AM10140 already mounted to a wheel. They are all a 5 on 4 1/2" bolt pattern: - Karrier S-Trail Radial Trailer Tire with…

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

I can help you determine which drawbar will be best for your vehicle. If you already have a hitch you will first want to make sure you get a compatible drawbar to that receiver size. I have linked all the custom hitch fits we show for your 2006…

I checked with SoftStart and they have a diagram for the install of their #SSR54FR on Furrion Chill RV AC units like the #FR58PR that you referenced.

There is a diagram of the wiring for the Furrion #FR58PR in the instructions, but I've gone ahead and linked a photo of the wiring diagram as well as the instructions for this unit.

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

Hey Mike, I would need more info to pick out replacement hubs for your boat trailer. Since we know they are Dexters you could look for a part number on the hub somewhere. You could find the axle capacity on the axle tag, you could get me the diameter…

Hi Don; I wasn't able to find anything with the model number and even if I could, I would only be guessing at the axle size for a replacement hub. You will need to identify your axle to find the right hub. You can either look for an axle tag or…