Hello Kevin, thanks for reaching out. I am sorry to say we do not offer an air distribution box to go with that. Main reason being what you have is an older AC unit that uses the now discontinued r410a refrigerant. The new RV AC units and…
Since the Dexter 10k axles have a 1-1/2 inch threaded diameter the correct replacement nuts would be the #6-96. The tang washer you could use with this would be #5-59.
Hey Craig. The #42 E-Z Lube Spindle w/ Flange item #TRU37FR, you were looking at, has a 1"-14 thread size. This spindle fits 5,200-lb - 7,000-lb trailer axles. It has a 5 bolt brake mounting flange. The distance from the flange to the tip of the…
Whatever bearing kit you got likely came with both to give you options. Since you already had a tang washer on your spindle you can stick with the tang washer. Using the tang washer like the #5-101 with a D washer like the #5-23 would give you no…
Hi Brandon; the Replacement Jack Screw and Nut Kit for Bulldog Sidewind Trailer Jacks #BD500217 is the correct replacement for the #BD182815. The gear kit #BD500212 is also available if you need replacement gears as well.
I did some looking and found that the 46210 and 46845 hubs you currently have use the same #L68149 inner bearing and #L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them,…
The Dexter 69-46 axle has a straight spindle with #L44649 bearings. For a replacement spindle you can use the BTR E-Z Lube Spindle for 2,000-lb Trailer Axles #TRU44FR. Then for an idler hub, the Easy Grease Trailer Idler Hub Assembly for 2K Axles…
There really should be a flat washer between the outer bearing of your hub and the nut that holds it on. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. The Washer For 1 inch Spindle,…
Hello Nick, thanks for reaching out. The Dutton-Lainson Boat Trailer Jack #DL22335 may work for you. It has 7/16" holes. They are 5-1/2" apart across. There is 2-3/8" between the top hole and the hole under it. Then there is 1"…
The Pro Series Adjustable 2-Ball Mount for 2" Hitches - 5-7/8" Drop, 4-5/8" Rise - 14K #63071 has a hitch pin hole diameter of 3/4 inches at the ball platform and 5/8 inches at the hitch pin hole. There is a lock set #63069 made to…
An easy way to tell if your hubs were originally oil filled or packed with grease is to remove the cap of the hub. Typically, if it is a press-in cap it is a grease hub, and if it is a screw-in cap it is an oil bath hub. Not only do semi trailers use…
Based off of my research, you can use the Replacement Caliper for Titan 10" Brakes #K71-773-02 for the passenger side, and the Replacement Caliper for Titan 10" Brakes #K71-773-01 for the driver's side, will work for you. These come…
Filters
