Hi Ronald; a search points to that being a 7k axle but I don't have a way to be sure without the serial number off of the axle tag. You can also measure your axle diameter which is enough to find the right kit. If you have a 3" diameter…
Hey Luke, the Dexter 13-143 part number cross references with a Dexter EZ Flex cushioned equalizer and the current exact replacement would be the part #K71-655-00. How did you like the EZ Flex setup?
The Lippert Components Heavy-Duty Replacement Shock - Yellow #LC283280 is 8.625 inches compressed and 13.5 inches fully extended. Your current suspension may extend and retract slightly further but the shocks will be a good replacement based on the…
Hey Bill, thanks for reaching out. The best replacement for your Dexter 013-143-03 Equalizers are the Dexter E-Z Flex #K71-652-00. This is identical in size to the current equalizer so it will be an exact replacement. This kit comes with new wet…
If you are looking to add shocks then measure using the following procedure: Compress the shock all the way (A) then mark the inner leg where the outer leg stops. Then release compression and measure the stroke (how far the shock moves) (B). Then…
Lippert Components Heavy-Duty Replacement Shock - Yellow #LC283280 are what you will need as replacement shocks. They are 8.625 inches completely compressed and 13.5 inches completely extended so under weight they likely will be right at your 11 inch…
Hello Dave; we don't have a good way to identify the shocks on your 2007 Triple E Topaz. What I would do is reach out to Triple E RV to see if they have any information on what shocks were originally installed. If I had to guess, I would say it…
Hey Adam, we have just what you are looking for with the MORryde Alltrek part #MR89DR. The 13-10 is the same as the #TREQ310 which is 4" tall and measures 6" between the outer shackle bolt holes. the MORryde ALLTREK 4000 #MR89DR is…
Hey John, I reached out to Dexter and they stated that they don't have these measurements for the Replacement Dexter Bolt-On Shock Kit #K71-697-00. I was able to get my hands on one and get the fully retracted length (pictures below), but…
I'm not exactly sure what you are asking; if it is about how to mount the Lippert shocks, the figure you referenced is simply a part of those directions. If you would like to clarify please let me know so I can get a better idea of what you are…
There are two Timbren systems for your 2023 Ford F-350, like you said, with the best definitely being the following part number: - Timbren Suspension Enhancement System #TFR350SDJ The reason for that is the #TFR350SDJ is designed for standard pickups…
I was unable to find any information with the numbers on your axle, unfortunately. However, you can contact the manufacturer of the trailer and they should be able to tell you exactly which inner and outer bearings you have. If for some reason they…
Filters
