Result: Malone Kayak trailer

Hey Stefano, yes the LowBed kit part #MAL33TR is all that you need to convert your Malone Microsport #MPG460XT to a LowBed style trailer. The Yakima DeepSpace part #Y65RR is also compatible with the 2nd Tier Kit part #MPG474 too. How come you are…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

Hey Tom, yes that is correct you would need to use the spacer kit part #AL52420 with the Air Lift LoadLifter part #AL88288 on your 2024 Chevy Silverado 1500 based on the dimensions you measured since you have the Eibach lift kit. Will you be doing…

Yes, the Malone MicroSport to LowBed Trailer Conversion Support Tubes #MAL33TR will allow you to transform your MicroSport Trailer #MPG461B2 into the LowBed #MAL25FR. This will make it much easier to load your kayaks or possibly we launch them…

The Malone LowBed MicroSport Trailer #MAL25FR and Malone MicroSport Trailer #MPG461B2 are very similar as they are both built on the same platform. This allows them to both carry the same weight and size kayaks. The #MPG461B2 has a 30" height to…

The Bunk Kit for Malone Trailers #MPG561 is designed to fit the 1-1/4" Crossbars #MPG4001 currently used on Malone trailers. You can still use them with your crossbars but will need to account for the difference in size with some flat…

Hey Cherie, unfortunately the Loading Ramp for Hollywood Racks Crosstrack Bike Racks #HLY39RR is not compatible with the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes #HLY84FR. Instead, you'd have to use a different bike rack like…

The big difference between the two trailers is the EcoLight trailers like part #MAL43FR were made to be lighter weight for smaller vehicles and have lower weight capacities. This weighs 145 lbs and has a 400 lb capacity whereas the MicroSport…

The crossbars on the Malone EcoLight Sport Trailer with V-Style Carriers for 2 Kayaks #MAL43FR are 58" long. While the 2 kayaks you are wanting to carry will each be 34" wide that will place the Kayak approximately 6" past the edge of…

The locking attachment is not sold separately. To get the wheel and the locking attachment for your MicroSport XT trailer you will need The Spare Tire for Malone MicroSport Trailer #MPG465. This spare tire has a galvanized finish that will help it…

I spoke with my contact at Malone who said that the coupler height of the Malone MicroSportXT Trailer #MPG460XT is 15". When we installed the Draw-Tite Max-Frame Trailer Hitch Receiver #76138 on a 2017 Mazda CX-5 the coupler height (from the…

On the Malone MicroSport Trailer #MPG460G the overall width side to side is 65 inches because the crossbars are the widest part of it. The trailer itself is about 55 inches wide if the bars were taking off. The overall length without an extension is…