Hello Patrick, thanks for reaching out. We do have a great option for upgrading a standard powered roof vent. What I recommend is the following: - MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke…
Both the Draw Tite hitches part number #DT45515 and #41930 are a confirmed fit for your 2006 Chevy Suburban so either would fit and could easily install without modification.
Hey, Michael! The bearing kit part #BK3-200 is our own etrailer branded bearing kits. We also do carry Dexter bearing kits, part #DX58ER and Timken, part #TMK92VR.
Hello Richard. I am sorry to inform you that we do not offer the aluminum Liger wheel in a 13". We do offer the Liger wheel, but a 14" like part #LH22FR is the smallest we have. We do have the Castle Rock ST185/80R13 tire you mentioned,…
I was able to find a picture of the part number 90110 C1 that you need and found that the exact replacement is the #BV0554-03 that you referenced. If you wanted white instead you'd want #BV0554-01.
The Taskmaster ST225/75R-15 bias ply tire you mentioned, part #A225R64WM carries an M speed rating, up to 81 miles an hour. Trailer tires don't carry a tread wear and heat rating like passenger car tires do, because they're only meant for use…
The closest match we have is the Karrier ST225/75R15 Radial Tire with 15" White Spoke Wheel - 5 on 4-1/2" - Load Range D #AM32545. This is a white wheel with a 5 on 4-1/2 inch bolt pattern with a tire size of 225/75R15 mounted on it except…
Yes, you can switch from 205/75-14 tires to 225/75-15 tires if you have the clearance all around the existing tires. You will also need to replace the wheels though because a 15 inch tire will not fit on a 14 inch wheel. I recommend going with radial…
The wheel and tire combos we offer do not come machine-balanced from the manufacturer. This can be done at a local tire shop if you wish. Most manufacturers will line up the heavy part of the wheel with the light part of the tire.
We have the perfect solution for you. I'd recommend using the Fulton weld-on drop leg stabilizer jack, part #FSJ1-SJ2. The jack is sold individually, but using two of them would provide 6000 lbs of support which would be plenty, as your trailer…
The Trailer Axle Beam #e93GR is the closest axle we have to the 93" hub face to hub face measurement you are looking for. It has a 94" hub face to hub face measurement. While the spring center on this axle is 79" you can have new…
Yes, in order to use the Square 2-Speed Jack w/ Crank part #TJD2SP-12000SP-F in tandem you would need to obtain the correct follow leg which is the Square Direct Weld Jack part #TJD-12000SP-F2. The handle for this follow leg can be discarded as you…
Filters
