Search: DEMCO EZ LATCH   >  

I have a solution for you, but we don't have a traditional-style coupler that will fit over your 4 inch trailer tongue. The straight tongue trailer couplers we offer fit up to 3 inch trailer tongues. I recommend using an adjustable channel…

Based on the picture you provided I believe you have the SAE solar plug port on your Braxton Creek Bushwhacker Plus 17BH so you should have no issues plugging your Go Power DuraLite Portable Solar Panel with Digital Solar Controller #GP66FR in using…

Yes, you will be able to replace your stock coupler with the Demco 50-Degree A-Frame Trailer Coupler #DM13205-95 as long as you have a standard a-frame trailer. I attached a picture below of the dimensions below so you can see if it would work for…

Hub and drum assemblies, like the Dexter #8-430-5UC3 you referenced, are universal so they typically fit any 9K - 10K axle just fine. With that being said, there are some exceptions out there so you just need to confirm that your axle uses a #387A…

Though we do have the replacement bearings, races, and seals available for your Hadco 3109 hub (which I have listed below), the combination used will not have an equivalent replacement hub available, unfortunately. Replacement Trailer Hub Bearing…

Starting with the safety chains they really need to be attached to the trailer frame and not the coupler hardware. If there is no where to attach the chains on the trailer you can weld on safety chain mounting brackets such as #MB12, #MB38, or #MB58.…

The only difference in the Demco Channel Tongue Trailer Couplers #DM16080-95 and #DM15931-95 is going to be the bolt pattern. One will have the 5-Bolt hole pattern and the other is going to have 4-Bolt holes. I have included images below showing the…

From the rear of the coupler portion on the Demco A-Frame Coupler #DM14793-81 to the center of the center bolt hole there is a distance of 4-1/2 inches. From the rear of the A-Frame mount to the center of the center hole there is a distance of 4-3/4…

The only differences between the Demco eZ-Latch Couplers #DM37ZR and #DM14793-81 is that the former has integrated loop holes for installing safety chains and a about a 2" drop while the latter doesn't come with provisions for attaching the…

Hardware is not included with Demco coupler #DM14793-81. The reason for this is different applications can require different hardware whether it be length or material (because dissimilar metals can lead to corrosion problems).

If you look at the diagram that I received from my contact at Demco, you can see several of the dimensions of the #DM14793-81 trailer coupler. If there were other dimensions you were needing, please let me know.

We have a large selection of A-Frame couplers like what would be on your older Winnebago travel trailer. You can certainly remove your weld-on coupler and replace it with a bolt-on unit, as long as the new coupler's capacity is correct for your…