Search: Coupler Pins Locks   >  

Currently the InfiniteRule Trailer Coupler Lock #IR58FR is only offered keyed unique. For a keyed alike option you will want to refer to one of our etrailer Locks #e98886 or #e98889 and select keyed alike from the drop down box when placing your…

Hey John, The Demco Trailer Coupler #DM88XR is a channel mount style coupler and would need to connect to a channel like the #DM55342. We offer different channel mounts and versions with the channel built into an actuator so finding the correct…

You can certainly go ahead and re use the existing 2 bolts, provided they are in good condition. The fish wire method shown in the video works too, but it is also very common to just use the two bolts like your old Atwood actuator. Personally I would…

The Demco Hydraulic Brake Actuator part #DM72VR is a great option to replace an Atwood 82543. That said, it does not come with any sort of reverse lockout feature therefore in order to reverse without the brakes locking up you will either need to add…

The distance between the lock pin and housing on the Bulldog Lifelong Trailer Coupler Lock #BD580403 is 1-5/8".

The distance between the 1/4" pin and the main lock body on the #IR98FR is 11/16". The length of the sides is 2-1/16".I have attached a diagram below showing all of the measurements for your reference.

What you have there are the Command 003-20 incandescent tail lights. Although we do not have the incandescent replacement, we do have the LED version which is the #CE86FR. You will want to keep the lights the same way they are now with the brake…

I do have an option for you but the coupler on your trailer is very old and we simply don't carry parts for them anymore as they were discontinued by the manufacturer. Therefore, the only option we can offer is a new coupler, the Demco Hydraulic…

Your best route is to replace your entire surge brake assembly as Atwood no longer produces any parts for their brake actuators. The Titan Zinc-Plated Brake Actuator #T47457207K is going to be your best replacement available. It is specific to disc…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

For a longer version of the hitch lock that comes with the part #BD580404 you would want the part #BD580402 as it has a 2-1/2 inch span. For the matching trigger latch lock as well you would want the part #BD580403.

With the Demco 4-Hole Adjustable Channel Bracket - Weld On - 8" Tall - 7,500 lbs #DM55342, the 7,500 pound weight capacity is the gross towing weight capacity. If you need a higher towing capacity, I recommend the Demco 4-Hole Adjustable Channel…