Hey Chaz, yes the Reese ball mount part #RP82AR that you referenced can be used in the rise position. The torque rating for the ball's nut will be based on the hitch ball that you use and not the ball mount.
Good afternoon Liz, there sure is! I highly recommend checking out the etrailer Ball Mount w/ Pre-Torqued #e99DR; it is rated at 10k lbs and has a drop of 2" which sounds perfect for your application. The ball is pre-torqued for you and the ball…
Self-adjusting brakes #AKEBRK-7-SA do not require that you travel in reverse for them to adjust. They can adjust themselves going forward or backward. Keep in mind that even self-adjusting brakes require 1 initial adjustment. You could just install…
Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.
We have a 10 inch keel roller with the part #YR10000 which then for the endcaps you'd just need the part #YR134-5. You may also be interested a new bracket like part #CE10304G and a roller shaft part #CE10726A.
With a 5/8 inch diameter shaft we have keel rollers like the part #YR10000 which is 10 inches long or we have the shorter version part #YR8000 which is 8 inches long.
In 2007, Chevrolet stopped offering plug-in connectors for brake controllers on their full size trucks with tow packages. Instead, you will have four or five blunt-cut wires bundled underneath your dash. The wire colors should be red with a black…
We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…
The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V is the direct replacement for your Magnatek 7345 model. If you want to replace the converter and the circuit breaker box then the Progressive Dynamics Mighty…
The Durabilt Ratchet Chain Binder #DU32MR will close up 8" from 28-1/2" overall length to 20-1/2" overall length. It is designed to fit chains with 5/16" to 3/8" thick links.
What I think you may have installed currently is the Global Link RV Entry Door Locking Latch, #295-000019. This sets in a cutout that is from 2-1/2" to 3" wide and 3-1/2" to 4" tall. Please verify the cutout dimensions of your…
I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
Filter Results
