Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I recommend the CE Smith Bolster And Swivel Mounting Brackets, part #CE10000G-4. These are 9 inches long and have a swivel feature that enables you to tilt the bunks to the correct angle to fit the bottom of your boat. We also carry the mounting…
view full answer...You can use roller bunks like the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers #DL21741 instead of carpeted bunks on your 2012 Deep V Tracker boat without any marks or indentations. The roller bunks…
view full answer...The Boat Trailer Roller Bunk Brackets #DL21742 do require 7/16" U-bolts such as #7163183UB. The bunk brackets are designed to be used with Roller Bunks #DL21740 or #DL21741.
view full answer...We do have a selection of slipper springs that are 1-3/4" wide which I have linked for you to check out. The one that is closest to the size that you mentioned is the 4-Leaf Slipper Spring #e33SR which is rated for 4,300 lb trailer axles. It…
view full answer...I went out into our warehouse and measured the bolt holes of the Trailer Coupler #DL13800 that you referenced and found them to be about 1/2 inch space 3 inches on center. Check out the video I put together that shows taking this measurement. If you…
view full answer...The coupler I recommend for your boat trailer is the Demco Channel Tongue Trailer Coupler #12564, which fits a 3" wide channel tongue, has a 10,000 lb capacity and uses the eZ-Latch system to fit a 2" hitch ball. This will allow you to hook…
view full answer...Your question came in blank, but judging by the pictures you submitted it looks like your hub seal is bad and you are looking to replace what you have. To pick out the correct replacement seal you will need to use your digital dial calipers to…
view full answer...It sounds like you have a UFP A-60 brake actuator on your EZ Loader trailer. The #T43397007K is designed for drum brakes so this would not be a suitable replacement. Instead, I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt…
view full answer...Your 2018 Winnebago Micro Minnie has 3500 lb torsion axles but they haven't been clear as to the manufacturer. If the axles have mounting holes 8 inches on center, then you can use the Dexter Torflex Lift Kit - Tandem Axle - 2-5/8" Lift…
view full answer...The hangers that come with the Tandem-Axle Trailer Hanger Kit #APT8 are going to be bare steel since they will need to be welded to the frame. This is how all hangers are going to come as they will need to be welded to the frame. Once you have them…
view full answer...I was able to confirm your wheels are 13 inches on your Zieman J1-B trailer. Because I don't know the tires currently on your trailer, I can only make recommendations for your spare based on best options for the two bolt patterns. If you have a 5…
view full answer...Either one is fine to do. With the Fulton Hi-Mount Spare Tire Carrier part #FSTC1000301 you are not going to be adding a great deal of width to your trailer so the difference is minimum. Giving you my opinion since there is no rule I would Choose the…
view full answer...Filter Your Search
Contact and Help