Search: BRKH10B   >  

Hey Dan, The info you provided does tell us a bit about the axle but isn't enough to look up what components go with with it. With it being a 3,500lb axle it's probably a generic 3,500lb kit for the bearings and seals but I'd hate to not…

Hello Cherry. To replace your Dometic Duo-Therm Quick Cool AC Unit I recommend the Advent Air #ACM150. This is made to be directly compatible with your existing Dometic AC system. You'll just need to remove the cover to your air distribution box…

Hi Ed, In regards to the 3,500 lb Demco Hydraulic Brake Kit #40716-15 and the Hydraulic Trailer Brake Kit #AKUBRK-35-D, starting with the country of origin, the Demco are made in the U.S. and the opposing brakes (made by AxleTek) are made in China.…

Well Steve, the only way for me to see exactly what brakes your trailer came with is by getting the serial number for each axle. I would say your trailer is most likely going to have 3,500lbs axles which would use a 10" brake like our etrailer…

Hey Sam, so from previous customers we have determined that the Sure Trac axles use the standard trailer axle components so yes the brake assemblies part #AKEBRK-35-SA and the hub part #AKHD-545-35-K would fit and work great.

Unfortunately Steve, I have no way to see exactly what lights came on your 2003 Pace American JT612TA2. Based on some images I could find it looks like your trailer uses the oval style light like the Optronics #STL72RB which is 6-7/16" long. If…

Hi Nate; the backing plate is not available as a replacement part so you will need the complete brake assembly. What you have in your picture is the #LC46WD. Brakes should be replaced in pairs so for the left and right hand brake assemblies you would…

The DICO Model 10 that you have is essentially the exact same thing as the Titan Brake Actuator #T1607500 that you referenced. This would be an exact replacement.

Hey Dan, the only difference between the Hydraulic Trailer Brake Kit #AKUBRK-35-D and the Hydraulic Brake Kit #AKFBBRK-35-D is that #AKFBBRK-35-D is free backing which lets you reverse your trailer without the brakes being actuated by the actuator…

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

The correct hub and drum assembly replacement for your Lippert 4,400 lb axle is the #8-407-5UC3-EZ. This comes with bearings and a grease seal. If you need brakes as well you can use the #LC66WD, or for self-adjusting brakes #K23-478-479.

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…