Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Your best option is going to be the Reese Strait Line part #RP66084 as it has a tongue weight range of 600-1,200 lbs which would be perfect for your tongue weight of 725 lbs. The sway control on this system is the only style on the market that…
view full answer...You're correct on needing a 8,000 pound GTW weight distribution hitch. When using a weight distribution hitch you need your tongue weight to be exactly in the middle of the range of the system, so it will help with the sway and not cause more. If…
view full answer...The signal wire you need to use for the left turn circuit of the #119250KIT that you referenced is a purple wire. The red is the running light circuit. On the right had side the blinker circuit is red and yellow is running lights. I attached link to…
view full answer...The Brophy Horizontal E-Track - Zinc Plated Steel - 5' Long item #ET05 are 5" wide. I have attached a diagram showing the dimensions.
view full answer...The Buyers Products Super Track Kit #337ST93 only comes in a length of 46-1/2 inches, or just under 4 feet. There is a 5 foot length of E-Track, the Brophy Horizontal E-Track #ET05 which will allow you to use the Erickson E-Track Tie Down Ring…
view full answer...I recommend the Fastway e2 Weight Distribution System part #FA92-00-0600 with 2" Hitch Ball part #A-90 for a Forest River Rockwood Geo Pro 15TB. In regards to using a weight distribution system, the rule of 10-15% for tongue load will still…
view full answer...For your 4,500 lbs trailer, I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control item #FA94-00-0600. This system has built in sway control that will keep your trailer in line with your truck when you're going down the highway…
view full answer...In this case I would go with the low side. Odds are you wont' be completely maxed out and sitting at 830 lbs. As soon as some of that water is gone you will also be under the 800 lb mark. The #17302 may give you a rough and rigid ride since fully…
view full answer...The Malone Axis Load Roller for Malone Truck Bed and Roof Load Extender - 42" Long, part #MAL52VR, that comes with the Malone Axis Truck Bed and Roof Load Extender with Load Roller, part #MAL32VR, is fixed in length. It does not extend in and…
view full answer...Hello Alan, Great question! The specifications of the Lock Pins that come with the #MAL32VR are 3/8" diameter, and 3" long. We do not have anything that is going to be a good fit, I did reach out to the tech at Malone to see if a 1/4"…
view full answer...Hello Jim, Great question, I went to Malone's site and and I do not see that they make one with a 48" roller. The great thing about the Malone Axis Truck Bed and Roof Load Extender with Load Roller #MAL32VR is that it is adjustable, the…
view full answer...Your situation is a great option for the Blue Ox SwayPro Weight Distribution #BLU54TR. This particular kit is rated for trailers up to 15,000lbs with a tongue weight of 1,000-1,500lbs. When you need to haul your travel trailer you can use some…
view full answer...