Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The spacing is going to depend on the size of your tires, so let's start with that. For a 16 inch wheel/tire combo with an 8 on 6-1/2" bolt pattern the best option is a ST235/80R16 size tire with a load range of G to handle the capacity of…
view full answer...Yes, the load range E Taskmaster ST235/80R16 Radial Trailer Tire #TTWTRTM2358016E will fit a 16x6-inch-wide rim such as #TA73VR. This tire also fits wider 16-inch rims: 6-1/2-inch, 7-inch and 7-1/2-inch. When mounted and fully inflated the overall…
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...The choice of oil bath or regular hubs is up to the manufacturer. They are usually found on higher capacity axles, though as you know there are some on lower capacity axles. You can convert some hubs from grease to oil bath using a kit such as…
view full answer...For the 6.50-16LT tire size you need a 16" wheel like the Dexstar Mini Mod which comes with a 6 on 5-1/2" bolt pattern #AM20757 as well as an 8 on 6-/12" bolt pattern #AM20761B. I'm not certain what bolt pattern you have so…
view full answer...It is possible for your 2021 Grand Design Reflection 303RLS to go from 16 inch to 17-1/2 inch wheels and tires, yes. You currently have a hub with a 6 on 5-1/2" bolt pattern, and since you mentioned replacing the suspension you would need one…
view full answer...The rod and nut for the 12,000 Series Ram jacks is #TJD-12000-RODNUT and the replacement bearing is #TJD-12000-BR.
view full answer...Easiest way to tell which gooseneck hitch you have is by looking at the safety cable loops. If they are about as wide as the gooseneck ball hole and are centered with the ball hole it's an EZr, if the safety chain loops are a smaller and offset…
view full answer...The Dexstar Steel Mini Mod Trailer Wheel part #AM20761B is what I recommend for a made in USA 16" wheel with 8 on 6-1/2" bolt pattern. It has a 0 offset which is most common. It's black in color. Don't forget the Americana Metal,…
view full answer...As long as your tires will fit 16" x 6" wheels and your current bolt pattern is 8 on 6-1/2 you can use the Vesper Steel Modular Trailer Wheel #TA77RR for a spare. This has a higher capacity of 4,460 lbs when compared to your current wheels…
view full answer...Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
view full answer...Do you by any chance mean 235/80-16 and 235/85-16? Because there isn't a 275 trailer tire size that I have seen. If so then the widths are the same between the two 235 sizes. The difference is overall diameter. The 235/80-16 is 30.9 inches in…
view full answer...Related Searches
Filter Your Search
Contact and Help