Result: 7 pin and 4 wire flat trailor harness

For your 2022 Toyota Tacoma I recommend the etrailer Trailer Hitch Receiver #e98905. This is a custom-fit Class III hitch with a 2" receiver. It features a matte black finish for a rugged look and corrosion resistance. It has a maximum gross…

First you would need a 4-way for your 2017 Hyundai Santa Fe to start for trailer wiring. For that you would need the part #C56332. Now if your trailer does not have brakes all you would need is the part #37185 as an adapter to convert the 4-way to a…

You have what is called a wishbone harness like #A20WB. This type of harness take the running light circuit and splits it at the trailer connector so that you do not have to run a jumper wire from one tail light to the other. The yellow/brown wire is…

On the 7-way wiring plug and lead part #H20046 there isn't a purple wire. Normally a purple wire for a 7-way is for a reverse light circuit. Which would correspond to the yellow wire of this adapter.

If you check out the attached instructions for the Curt TriFlex Trailer Brake Controller #C24VV you can see that the OL code you are getting means that there is an "Overloaded output circuit, trailer brake system fault". Whichever…

The Replacement Crossbar #910021-00 you were looking at would get installed on your 1988 Jeep YJ via the Roadmaster Crossbar-Style Base Plate Kit #1409-1. The #1409-1 will only work with the factory steel bumper, so if you have a different bumper you…

I checked the install instructions for the Roadmaster base plate kit #RM-521448-4 which is a fit for your 2017 Jeep Wrangler Unlimited and like you said the only permanent modifications needed is the trimming of the rock guard like in the picture I…

No, the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56200 is sending power to the lights and not pulling power from them to send out to the 4-pole connector. There are plug-in style trailer wire harnesses available though that I can…

It sounds like you are replacing your older 6-pole wiring harness on your Jayco popup camper to a 4-flat connector like #HM48110. When you do this, you will have the black auxiliary wire and the blue brake wire remaining. You will no longer be able…

Sounds like you are looking for the part #37995. This is a pair of 6-way connectors that Jayco uses on their pop-ups.

Yes you can install and use the Autowbrake Electric Brake Controller #3430001 with your 2005 Ford F-250. The factory brake controller will not be a factor since the Autowbrake will override any signal coming from your factory brake controller! I have…