Hey Daniel. To convert your surge brake trailer over to electric over hydraulic system you'll need the Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes item #HS481-8067. The Hydrastar item #HS481-8067 works with factory…
Hey Derek! Blue Ox 2-Point Weight Distribution w/ Sway Control #BLU75FR will fit your 8" tall I-beam frame on your trailer. I reached out to my contact at Blue ox just to double check and they said 8" is the max and it will work with an…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
I do have a solution, but we do not have either of the Draw-Tite hitches. Instead, I recommend the Curt Trailer Hitch Receiver #C15324 for your 2004 Suburban. This is also a Class V hitch. It has an even higher capacity when compared to Draw-Tite…
The factory hitch on your vehicle is integrated into the factory bumper mounting brackets, so removing the OEM hitch will result in losing your bumper. My contact at Curt tells me that he also had an early 2000's F-150, and he ended up having to…
The Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes #HS481-8067 is designed to be completely plug-and-play so the female end of the 7-way would need to connect to the 7-way cable that's already installed on the trailer…
The light dimensions of the Optronics LED #TLL12RK are 7-9/16" long x 2-3/4" tall x 1-3/4" deep and the hole size needed is 6.75" by 2.5 inches. I confirmed this with my contact at the manufacturer and I've attached a template…
The Optronics Fleet LED Trailer Tail Lights part #TLL12RK which install inside a 6-11/16" x 2-5/8" opening is the closest option we have for you and it comes with the needed grommet and pigtail for installation.
According to my research, your 2017 Subaru Outback Wagon has a max towing capacity of 1,000 lbs if the trailer does not have brakes or 2,700 lbs if the trailer does have brakes. You can improve the towing performance/efficiency of your vehicle with a…
The most likely cause for the incorrect behavior of your trailer lights, where activating one turn signal causes all trailer lights to blink, is an insufficient ground (or a short to ground) on either the vehicle or the trailer. Since you re-wired…
As long as your truck originally was a cab and chassis model of truck before the dump bed was installed the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC #3371809065 that you referenced would fit and work well.
I have a few options for you to consider, but I do not have the exact specs of the safety chain loops on your Touareg so you would need to pick from the following to see which would be the best solution. We have Clevis hooks in various diameters that…
Filters
