Result: 5th wheel tripod

The Replacement Ball Assembly part #UF19-001057 for Ultra-Fab Gooseneck Tripod Stabilizer that can be used with the Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer part #UF19-950500 is a 2-5/16" ball. We also carry the Ultra-Fab Gooseneck…

I went ahead and pulled this Replacement I-Beam Jack Bracket #LC349975 from our warehouse to measure. I have attached the dimensions below. Hope this Helps.

The Replacement Ball Assembly #UF19-001057 that you referenced can be used with an Andersen Ultimate fifth wheel adapter but it has to be used with an Ultra Fab stabilizer like the #UF19-950500 since we can't guarantee it would work on an EAZ…

I attached a dimension picture I got from Lippert for the Replacement I-Beam Jack Bracket #LC349975 that you referenced.

To install the Replacement I-Beam Jack Bracket #LC349975 for Lippert Ground Control 3.0 #LC358590 you'll need to follow the instructions that came with the Lippert Ground Control 3.0. I've attached a cutout from the instructions for the…

Your customer is correct. The capture plate (must be a PullRite SuperGlide hitch) would get in the way of a 5th wheel king pin tripod. Presumably though they would only be using this for more long term use and could remove the capture plate or just…

Sounds like you have a capture plate on your trailer's pin box so that your Superglide will work. The Ultra Fab Tripod part #UF19-950001 would work just fine with the capture plate as it just fits around the king pin.

No, use of the Timbren suspension enhancements like the Timbren Rear Suspension Enhancement System #TDRTT1500 will not void your warranty. You are protected by the Federal Magnuson-Moss Warranty Act. This act says if something breaks on your vehicle…

Beautiful truck and travel trailer you have there! Airbag suspension enhancement is the best way to reduce rear sag and improve the handling of your truck when you are pulling a heavy load, such as your 40 foot Montana 5th wheel. You can then deflate…

The overall height of the mounting plate of the Replacement I-Beam Jack Bracket for Lippert Ground Control #LC349975 is 13 inches.

The Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System #LC675817 is designed for use with fifth wheels and would work extremely well for your 2006 Keystone Raptor. It has six jacks, with two landing gear jacks that mount to existing…

I have attached for you below the complete dimensions of the Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 part #LC349975 to the degree that Lippert was willing to share. If you require further dimensions, I'd need to know…