Result: 5th wheel to ball adapter

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. First thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and…

The overall better route will be the B and W Companion Hitch part #BWRVK3500 as long as the vehicle has a B and W Gooseneck Turnoverball hitch installed. The Companion setup is often regarded as the nicest hitch around so whenever available I…

Yes, it is true that most types of 5th wheel to gooseneck adapters will cause stresses on the trailer's frame and in some instances may actually void the warranty on the trailer frame. However, there is one type of 5th wheel to gooseneck adapter…

We do not currently have either the Andersen 3220 Ultimate Hitch or the PullRite 2600 gooseneck adapters that you referenced. Based on my research though it looks like the Pullrite has an offset of 3-1/2 inches and the Andersen has a total offset of…

I went out to our warehouse and pull the Demco Base Rails #DM6012. These rails measure 33 inches long and 5 inches in wide.

The Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550034 can only use a lube plate that is a maximum of 3/16 inches thick so you can use the #RP83004 that is 12 inches diameter and 1/8 inch thick or the Curt 10 Inch #16721 that is…

The lowest profile flatbed fifth wheel hitch we offer is the B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #BWRVK3050 which is about 10-1/2" from the base to the skid plate. It is designed to be used with the…

I do have an option for you but once you install the Replacement Legs for Reese Titan part #RP58449 with the Reese Universal Base Rails part #RP58058 on your Head Assembly for Reese Titan 16 5th Wheel Trailer Hitches part #RP58446, the distance from…

I went out to our warehouse to take a look at the Demco SL Series Base Rails #DM6012 that you referenced. There is a set of 3 mounting holes at each end of the rails. The holes are spaced apart 4 inches on center, with a distance of 10 inches between…

We do not offer mounting brackets for flat bed trucks because there can be so many different dimensions. You will need to fabricate brackets or have them made for the fifth wheel installation. My contact at Demco said they use 3/8-inch steel for the…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…