Result: 59236

Hi Cliff; sometimes a wiring harness like the #C44FR still works even without the factory tow package. However, it is required for your 2025 Chevy Equinox EV LT. If you don't have the tow package then your vehicle doesn't have the port to…

In order to install a 7-way trailer connector on a 2022 Mazda CX-9 you'll need to start with a 4-way, the T-One Vehicle Wiring Harness for Factory Tow Package part #118278 which is plug-in-play. Then you can adapt this into a 7-way using the 4 to…

I wish there was a plug and play harness that would allow you to install a Tekonsha brake controller but it looks like you are going to have to hardwire a brake controller to your 2012 Nissan NV. The first thing you will need is a 4-way if you do not…

The Curt hitch part #C38JR fits the AWD and non-AWD versions of your 2023 Volkswagen Taos so it would work great for you. It's also mostly hidden since only the hitch opening hangs below the rear bumper and installs pretty easily as well.

Thule keys are compatible with the Karrite lock cylinders as the boxes were actually manufactured by Thule for Sears. For lock number 2824, you'll need #THKEYN2824 as a replacement.

We have ladder racks that are compatible with the BakFlip Revolver X4 tonneau cover you have on your 2017 Ford F-150 short bed. If you have a 6-1/2 foot bed you'd want the part #TH43002XT-501. If you had the 5-1/2 foot bed you'd instead want…

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack part #TH43002XT-782 for 5-3/4' beds or part #TH43002XT-781 for 6-1/2' bed will work on a 2019 GMC Sierra 1500 with BAKFlip M4 Tonneau Cover.

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

The ability to use a tonneau cover is going to depend on how that factory tonneau cover mounts to the bed of your 2020 Ford F-150. If the cover just clamps onto the inner lip of the bedrails and doesn't cover up your stake pockets then you can…

It's pretty simple. A 4-bolt rail uses four 5/8 inch bolts ran through the floor of the truck bed into the frame brackets. The bolts run down through the center of the raised part of the rail, as shown in the photo I provided. A 10-bolt rail uses…

In order to determine the correct hub and drum replacement you will need to know what bearings your trailer is using. Bearing Buddy Bearing Protectors like the #BB1980A-SS that fit a 1.98" hub bore are commonly found on 2,000-3,500 lb axles, so…

No, there isn't a procedure because the wiring harnesses for the Non-PHEV 2024 Mitsubishi Outlander models are designed to go through the fenders and out the bottom of them. They connect behind the tail lights. The Curt item #C43WR and the…