Search: 41944   >  

to the top of the receiver tube is 3 1/8inch Do you know what the Draw-tite 41944 measures | I saw the picture that Conner L did on the BandW HDRH25189 measure distance from the flange to the top of the receiver tube is 3...

I am looking for the Draw Tite Hardware Kit 41944. I have the hitch, need the hardware. Do you have | I am looking for the Draw Tite Hardware Kit 41944. I have the hitch, need the hardware. Do you have it? | For replacement...

Fracture model # 41944 where is it made USA? | Fracture model # 41944 where is it made USA? | The Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center # 41944 for your 2004 GMC Sierra is made in Mexico. However, Curt...

Trailer hitches like the Draw-Tite Ultra Frame # 41944 must be installed using the exact hardware | What size bolt does this take and type to mount to frame? Thanks! | Trailer hitches like the Draw-Tite Ultra Frame # 41944...

to install the draw-tite ultra frame reciever 41944 in place of my stock oem receiver on my 2006 Chevy | I have a 4 inch after market exhaust which is located in the same location as the stock exhaust, the only differance is...

Hi, looking to replace the hitch on my 2006 GMC Sierra 2500HD Longbed. The Drawtite 41944 is my #1 | Hi, looking to replace the hitch on my 2006 GMC Sierra 2500HD Longbed. The Drawtite 41944 is my #1 pick so far and Ive watched...

/ Cast Center - Custom Fit - Class V - 2" # 41944 you were looking at and it is 3" as shown | Looking at using part number 18159 square or round mount the 7 way plug to this hitch for a clean look. Would one of these options...

. All are shown on the linked page. Draw-Tite's 2-inch hitch # 41944 is a no-drill install since | Im looking for a class v trailer hitch for my 2009 Chevrolet 2500. The factory hitch is a class III but it is also bolted to...

Hello, I was looking at the 41944 hitch for a 2005 Chevrolet Silverado 3500 single wheel 8ft bed | Hello, I was looking at the 41944 hitch for a 2005 Chevrolet Silverado 3500 single wheel 8ft bed. It doesnt appear to have a...

one that will. It needs to be able to pull a camper, etc. Part #41944 | Will this fit a 2001 GMC Sierra 3500 flat bed dually with a 34 inch chassis? If not can you suggest one that will. It needs to be able to pull a camper,...

First, for both Draw-Tite trailer hitch # 41944, and Curt trailer hitch # C15302, the receivers | Comparing these 2 hitches I have a couple of questions. How do the receiver box heights compare? Which has better corrosion...

a regular pickup model and not a cab and chassis model you can install Draw-Tite trailer hitch # 41944 | Fit our truck 2001 chev CC 3500 dually 4x4 8 bed Noticed most of the comments where about 2500 truck installations. Concerned...

the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center # 41944 you're looking at. | Will the Torklift R3500 fit a 01 Chevy 2500 HD with a Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class...

Yes the Draw-Tite Trailer Hitch, # 41944, will fit a 2004 Chevy Silverado 2500HD long bed. I have | Will this item work on a 2500HD long bed? Thanks | Yes the Draw-Tite Trailer Hitch, # 41944, will fit a 2004 Chevy Silverado...

want the # 41944 which has a trailer towing capacity of 13,000 lbs which would be most likely more than | Will the 3500 hitch fit the 2500 truck frame. Wanting the strength of the 3500 hitch | The part # 41938 only fits the...

The Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" # 41944 | I entered my vehicle info: 2007 Chev Silverado 2500HD New Body and this hitch is suggested. My vehicle does not seem to...

recommend the Draw-Tite # 41944 which has a similar capacity of 13K towing and 1950 lbs of tongue weight | I have a 2002 Chevy 2500hd. Does this hitch fit that truck. Thanks | It will not if your truck came from the factory...

The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41944 is confirmed to fit your 2008 Chevrolet | Hi. Im having trouble find a hitch for my 08 Long bed Chevy 2500. Will this part fit for sure. I dont want to have to send another...

For your 2005 Chevy Silverado I would recommend the Draw Tite Hitch part # 41944. This hitch | Looking to replace oem hitch on 2005 Chevy Silverado 2500hd, 6 1/2 foot bed. Is there a direct replacement ? I dont mind drilling,...

The Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41944 which is a fit for a 2003 Chevrolet | I recently installed a flatbed on my truck. Does this hitch require a bumper? | The Draw-Tite Ultra Frame Trailer Hitch Receiver...

The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41944 is not confirmed to fit on your 2005 | Hello, Will this hitch fit a 2005 1500 HD with quadrasteer? What seems to be a 2500 running gear. | The Draw-Tite Ultra Frame Trailer...

For your 2004 GMC Sierra 2500HD we have the Draw Tite part # 41944 which is a Class V confirmed | I have a 2004 GMC 2500HD with a duramax diesel. I want to replace the factory oem hitch due to an oval pin hole in the hitch....

# 41944. Both have a concealed cross tube and a bolt on installation. Each of these also comes | Will this hitch work on my 2007 GMC Sierra classic 2500? It says it fits 2007 GMC Sierra classic, I am wondering if this will...

a factory trailer hitch. For that you would want the Draw Tite hitch part # 41944 which will fit your truck | Hello, I have a 2002 Silverado 2500HD crew cab with the 6.5foot bed. My factory hitch bolted through the bumper...