Search: 4 way pigtail   >  

Yes, it is! Honda and other manufacture's like to leave the fuses out of new vehicles that do not come with a functional towing package to save on costs. You can verify if you're missing the fuses by checking your fuse box but I am pretty…

Hey Dan, there's no reason the Folding Ladder for Rhino-Rack Pioneer Platform Racks #RRRAFL that you referenced couldn't install in the tracks on top of the Yakima LockNLoad platforms.

Yes, the TrackTowers part #Y52AV does fit into Yakima HD tracks like what you have installed on your trailer.

Brad, yes it's totally fine to have 1/4" on either side of the tracks #Y01127 - Yakima just states that the tracks need to be aligned with each other and that they are symmetrical on the vehicle. As far as your roof being curved that's…

Yes, the TrackTowers for Yakima Crossbars and Platforms #Y52AV that you referenced do fit the Rhino-Rack RTC-Style Roof Rack Tracks #RTC18.

The Timberline is actually the towers #Y33TR, so you will either have the CoreBar crossbars #Y00421 or the JetStream #Y00426. You can trim these bars to a shorter length and I do recommend using a new hack saw blade to do so. The aluminum crossbar…

The Yakima BedRock HD Truck Bed Rack #Y01160-59 with the 78" crossbars is what Yakima test fit for your 2018 Ford F-150 and since the next size down is 10" less with the 68" HD Bars #Y01158 I am a little skeptical that the system would…

I reached out to Yakima in regards to bending the Yakima 42" Tracks for Roof Racks #Y01126 and they told me that yes it is okay to bend the tracks during the installation. For the rest of the installation you can use a quantity of two of the…

The Replacement Mounting Brackets #RR43217 for the Rhino-Rack Folding Ladder #RRRAFL have a pin diameter of 11/32". This is the pin that the ladder will slide onto. I have also included measurements for the bracket in a image below. The bracket…

It sounds like you are replacing your older 6-pole wiring harness on your Jayco popup camper to a 4-flat connector like #HM48110. When you do this, you will have the black auxiliary wire and the blue brake wire remaining. You will no longer be able…

Sounds like you are looking for the part #37995. This is a pair of 6-way connectors that Jayco uses on their pop-ups.

Depending on the configuration and mounting options on your trailer you may be able to use a spare tire carrier like the Fulton Spare Tire Carrier, #FETCSTL0701. When used with a spare tire with a 5 on 5 bolt pattern the bracket can be bent to fit.…