Search: 4 pin   >  

I attached a picture that I took from the instructions for the TracRac #TH29056XT that you referenced that shows the tech tip for the Ford E-150s like what you have. The issue is the shape of the Ford gutter. The strip pushes the J-hook clip far…

At this time there is only one ladder rack that is compatible with a tonneau cover for your 2024 Toyota Tundra. The rack is the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-5955. However, this does depend on the tonneau cover you…

We do ship to Canada! Typically when you get those flashing green lights, it is because of a voltage issue. I would use a volt meter like the Digital Multimeter #PT89ZR to ensure you are getting the proper voltage. If you are then I would assume…

The Thule Telescoping Ladder for Vans #TH301404 uses a magnetic mount system. This can be placed in multiple places on your van depending on what point you need to access. As far as a mount to store the ladder this can vary from vehicle to vehicle…

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

Depending on the capacity you need I do have some A-Frame jack options you might like. Take a look at the Ultimate Trailer Jack #322-RDJ-2K. It is more adjustable than other jacks and measures just 1-3/4" from the mounting bracket to the bottom…

The magnet itself is 3 3/8" wide and the piece that it is on is 4" wide, so you'll need at least 4" of room to mount the Thule Telescoping Ladder for Van #TH301404 on your 2013 Sprinter.

The clamps on the Thule TracRac TracVan Van Ladder Rack - 2 Bar - 500 lbs, part #TH29055XT, are not rubberized. In order to reduce the opportunity for your 2013 Van to be scratched by this ladder rack you would have to make sure the rain gutters are…

I strongly recommend running the 12 volt power wire from the Curt Wiring Harness, #C59496, directly to the vehicle battery. The 12 volt accessory circuit was not designed to support the additional load of a trailer wiring harness. A wiring harness…

I have spoken with one of my contacts at Bestop, who confirm that the EZ Fold Tonneau Cover you referenced, part #B1612501 is indeed a fit for your 2001 Ford Ranger pickup with the 6 foot Flairside (which is the Ford term for stepside) bed. To see…

Hi John, The Hollywood Racks Safety LED Light Bar for Bike Racks #HLY54RR won't work on the Hollywood Racks Destination EBike Rack #HLY66ZR. As you mentioned, you wouldn't be able to attach it, though there is an ebike rack it will work with,…

The best option we have for load stops on the TruXedo Elevate Truck Bed Rack System is the Load Stops for Rhino-Rack Vortex Aero Crossbars part #RRRLH2. These are channel mounted load stops which slide into the t-track on top of the crossbars.