Search: 4 Pin To 7 Pin Adapter > !RV Sewer > etrailer x >
!RV Sewer
Filter ResultsUniversal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires - ETBC7
In Stock
If your vehicle already has a 4-way flat, this kit includes everything you need to install an electric trailer brake controller and 7-way connector. If there's not an existing 4-way flat on your vehicle, you can purchase one separately.
- Trailer Brake Controller
- Installation Kits
- etrailer
Gooseneck to 5th Wheel Trailer Coupler Adapter - Round - 30K - KPG5-R30IP
In Stock
King pin coupler allows you to pull your gooseneck trailer with a fifth-wheel hitch. The height easily adjusts to fit your application. Round inner tube is included.
- Adapts Trailer
- Gooseneck Trailer to Fifth Wheel Hitch
- Replaces Inner Tube
- Gooseneck Coupler Adapters
- etrailer
- No Offset
- 30000 lbs GTW
7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires - ETBC7L
In Stock
If you have only a 4-way flat on your vehicle and want to install a brake controller that pulls power from a 7-way trailer connector instead of wiring directly into your vehicle, this kit will adapt your plug for use with your brake controller.
- Trailer Brake Controller
- Installation Kits
- etrailer
Gooseneck to 5th Wheel Trailer Coupler Adapter - Inner Tube - Square - 25,000 lbs - KPG5-Q25-IP
In Stock
King pin coupler allows you to pull your gooseneck trailer with a fifth-wheel hitch. The height easily adjusts to fit your application. Square inner tube is included.
- Adapts Trailer
- Gooseneck Trailer to Fifth Wheel Hitch
- Replaces Inner Tube
- Gooseneck Coupler Adapters
- etrailer
- No Offset
- 25000 lbs GTW
etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches - e98942
In Stock
Never get on your hands and knees again to install an accessory in your hitch. This stop collar automatically aligns the hitch pin holes on your hitch and a 2" accessory. Once installed, it doesn't need to be adjusted.
- Collars
- 2 Inch Hitches
- etrailer
Trailer Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver - e63YR
In Stock
Adapts your 2" receiver for use with 1-1/4" hitch accessories. Hitch pin and clip included. Hitch lock sold separately.
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- Fits 2 Inch Hitch
- 2 Inch to 1-1/4 Inch
- etrailer
Explore Expert Info
![Our Expert]()
on Search Results
on Search Results
Mounting Bracket 4-Pole Flat - 18144
Mounting bracket for 4-way flat connectors secures your trailer wiring up and out of the way. Includes required mounting hardware.
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- etrailer
Ram Gooseneck to 5th Wheel Trailer Coupler Adapter - Round - 30,000 lbs - KPG5-R30
In Stock
King pin coupler allows you to pull your gooseneck trailer with a fifth-wheel hitch. The height easily adjusts to fit your application. Round inner and outer tubes replace the gooseneck coupler on your trailer. Load-bearing pin included.
- Adapts Trailer
- Gooseneck Trailer to Fifth Wheel Hitch
- Replaces Inner and Outer Tubes
- Gooseneck Coupler Adapters
- etrailer
- No Offset
- 30000 lbs GTW
Replacement Trailer Hub Bearing - 2788 - 2788
In Stock
High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number.
- Bearings
- Standard Bearings
- Bearing 2788
- Race 2729
- etrailer
- 1.500 Inch I.D.
- 5200 lbs Axle
Gooseneck to 5th Wheel Trailer Coupler Adapter - Square - 30,000 lbs - KPG5-Q30
In Stock
King pin coupler allows you to pull your gooseneck trailer with a fifth-wheel hitch. The height easily adjusts to fit your application. Square inner and outer tubes replace the gooseneck coupler on your trailer. Load-bearing pin included.
- Adapts Trailer
- Gooseneck Trailer to Fifth Wheel Hitch
- Replaces Inner and Outer Tubes
- Gooseneck Coupler Adapters
- etrailer
- No Offset
- 30000 lbs GTW
Replacement Trailer Hub Bearing - 15123 - 15123
In Stock
High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number.
- Bearings
- Standard Bearings
- Bearing 15123
- Race 15245
- etrailer
- 1.250 Inch I.D.
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
Trailer Hitch Extender for 1-1/4" Trailer Hitch Receivers - 7" Long - e68YR
In Stock
Extend your trailer hitch receiver opening to clear your spare tire when using your hitch-mounted bike rack. Prevents your trailer from hitting a rear-mounted propane tank when making sharp turns. Hitch pin and clip or hitch lock are sold separately.
- Hitch Extender
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- Fits 1-1/4 Inch Hitch
- etrailer
- 7 Inch Extension
- 350 lbs
Bearing Kit, LM67048/25580 Bearings, 10-36 Seal - BK3-300
In Stock
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing LM67048 and 25580
- Race 25520 and LM67010
- etrailer
- 5200 lbs Axle
Ram Gooseneck to 5th Wheel Trailer Coupler Adapter - Round - 25,000 lbs - KPG5-R25
In Stock
King pin coupler allows you to pull your gooseneck trailer with a fifth-wheel hitch. The height easily adjusts to fit your application. Round inner and outer tubes replace the gooseneck coupler on your trailer. Load-bearing pin included.
- Adapts Trailer
- Gooseneck Trailer to Fifth Wheel Hitch
- Replaces Inner and Outer Tubes
- Gooseneck Coupler Adapters
- etrailer
- No Offset
- 25000 lbs GTW
etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plate - RV Mount - 10,500 lbs - e84ZR
This sleek tow bar can handle your large vehicle, no problem. Heavy-duty but not heavy: arms support their weight while you hook up and swing easily to either side for storage. Integrated safety cables keep your setup organized. Built-in rise/drop.
- Hitch Mount Style
- Telescoping
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- etrailer
- Steel
- Non-Binding
- 10500 lbs
Gooseneck to 5th Wheel Trailer Coupler Adapter - Square - 25,000 lbs - KPG5-Q25
In Stock
King pin coupler allows you to pull your gooseneck trailer with a fifth-wheel hitch. The height easily adjusts to fit your application. Square inner and outer tubes replace the gooseneck coupler on your trailer. Load-bearing pin included.
- Adapts Trailer
- Gooseneck Trailer to Fifth Wheel Hitch
- Replaces Inner and Outer Tubes
- Gooseneck Coupler Adapters
- etrailer
- No Offset
- 25000 lbs GTW
etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates - RV Mount - 6,000 lbs - e74ZR
In Stock
This versatile tow bar is easy to use, with arms that support their own weight while you hook up and swing to either side for storage. Integrated safety cables keep your setup streamlined and organized. Built-in rise/drop keeps tow bar level.
- Hitch Mount Style
- Telescoping
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- etrailer
- Steel
- Non-Binding
- 6000 lbs
Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long - e38YR
In Stock
Adapter sleeve lets you use your 1-1/4" hitch-mounted accessories with your 2" x 2" trailer hitch receiver. Sturdy steel is powder coated for corrosion resistance. Hitch pin and clip or hitch lock are sold separately.
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- Fits 2 Inch Hitch
- 2 Inch to 1-1/4 Inch
- etrailer
- 350 lbs
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs - 989900
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- 7500 lbs GTW
- Class III
- etrailer
- Steel Ball
- Ball Mount Kit
- Steel Shank - Gloss Black
Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers - 5506
In Stock
- Trailer Brake Controller
- Installation Kits
- etrailer
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98842
In Stock
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
- Custom Fit Hitch
- Class III
- 8000 lbs WD GTW
- 900 lbs WD TW
- etrailer
- 900 lbs TW
- Visible Cross Tube
- 6000 lbs GTW
Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Left Hand - 8,000 lbs - AKEBRK-8L
In Stock
Self-adjusting driver's-side electric brake measures 12-1/4" x 3-3/8". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plate resists rust. Dust shield protects from debris.
- Trailer Brakes
- Electric Drum Brakes
- Brake Assembly
- 12-1/4 x 3-3/8 Inch Drum
- etrailer
- LH
- 8000 lbs
Single Axle Trailer Fender for Enclosed Trailers - Steel - 15" to 16" Wheels - Qty 1 - HP46VR
In Stock
10-3/4" Wide x 36" long x 20" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.
- No Step
- 15 Inch Wheels
- 16 Inch Wheels
- Steel
- For Single-Axle Trailers
- etrailer
- 10-3/4 Inch Wide
- 36 Inch Long
Single Axle Trailer Fender for Enclosed Trailers - Steel - 15" to 16" Wheel - Qty 1 - HP66VR
In Stock
13" Wide x 36" long x 20" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.
- No Step
- 15 Inch Wheels
- 16 Inch Wheels
- Steel
- For Single-Axle Trailers
- etrailer
- 13 Inch Wide
- 36 Inch Long