Search: 3375601101   >  

We can definitely get you set up. For a 7-way wiring harness for your 2024 Honda Pilot trailsport I recommend the Curt T-Connector #C35ZV which will plug in to the existing tow package connector at the rear your vehicle. I do also recommend getting…

Based on your manual indicating 7" brakes it is probably a 2,000 lb axle. That should be a 4-bolt brake flange on the axle as well. Try checking your axle tag to see if you can verify this. The capacity may be listed, or it can be found with the…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…

The left side is the driver side, right side is passenger side. On a trailer brake assembly like #23-105 the arm that the magnet is on points to the front of the trailer and the magnet always will be on the bottom. I have included a picture that…

It does take a few good and hard stops at full power (12 volts) in order to set the braking adjustment on a set of self-adjusting braking assemblies. That said, I would first make sure you are getting a full 12 volts out of your brake controller…

The light dimensions of the Optronics LED #TLL12RK are 7-9/16" long x 2-3/4" tall x 1-3/4" deep and the hole size needed is 6.75" by 2.5 inches. I confirmed this with my contact at the manufacturer and I've attached a template…

The Optronics Fleet LED Trailer Tail Lights #TLL12RK themselves actually measure 6-1/2" long and 2-5/16" tall. The rubber grommets are what makes the overall dimensions 7-9/16" long x 3-5/16" tall and since those are the outside…

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

It is not a good idea to use weight distribution with a folding tongue due to the amount of force applied by the spring bars to the trailer. If you were to do it you would need to have a pole tongue adapter such as #RP58393 since the trailer does not…

If you're hearing clicking it's most likely just the brake controller testing for connection to the brake magnet in the assemblies #23-26-27 by sending a pulse and energizing the magnets, causing them to cling to the hub for a second.…

If you are talking about adjusting the camber of your trailer this can be done by a professional at a trailer alignment shop. There's really no way to shim hubs as they are only held on by the one spindle nut at the end of each axle. The 4 bolt…