Result: 3300

Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…

Since your 2019 F-350 is a long bed you'll be best off starting with the pivot arms of your B&W Hitch #BWRVK3300 installed in the positions that place the hitch head furthest forward, closest to the cab. To do this install the pivot arms with…

When installing the pivot arms on your B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000lbs Item #BWRVK3600 you'll want to ensure that you have 6" of clearance between the bed rails and the nose of your…

Having the head of a B and W Companion like the #BWRVK3500 positioned with the pivot arms in the middle most horizontal and vertical setting would give you the most neutral position that should work the best for most trailers under most…

The B&W Companion OEM 5th Wheel Hitch #BWRVK3715 does have 2" of front to back adjustment. You would attach the pivot arms to the base in the desired position fore or aft.

Having the scooped corners on your fifth wheel is a neat feature that will eliminate the need for a slider and save you some dollars on the hitch purchase. The 20K capacity #BWRVK3300 B&W Companion you'd looked at would work well for you. As…

I have included how to determine if you can use the fixed B&W Companion OEM 5th-Wheel Hitch #BWRVK3300 in your 2022 Ford F-250 with 6.75' bed below. Steps Needed to Determine the Turning Clearance You Have When Towing a 5th Wheel Trailer with…

I spoke to my contact at B&W about the B&W Companion part #BWRVK3300 for your 2018 Ford F-350 with the 8' bed and they informed me that they recommend positioning the arms so that the king pin rests 1" forward of the rear axle. This…

Changing the positioning of the support arms that hold the head of the B&W Companion #BWRVK3300 will shift the pin weight of the trailer. Ideally you will want to keep the king pin centered over the rear axle of the truck or slightly forward of…

When Installing the B&W Companion OEM 5th-Wheel Hitch #BWRVK3300 into your 2022 Ford F-350 with the factory prep/puck system you will need to measure the height of your 5th wheel trailer from the pin box to the under belly of the 5th wheel…

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

Since your 2008 Keystone Mountaineer 31RLD is a tandem axle trailer you could use the Correct Track Tandem lift kit part #RR23QX to provide either a 1-1/4 inch or 2-1/4 inch lift for better ground clearance.