Result: 305736

I believe I have a solution for you, but I am going to need you to verify your bolt pattern since the only bolt pattern it wouldn't fit is 5 on 4-3/4. I attached an FAQ on determining bolt patterns for you to check out also. Check out the picture…

For the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter, the kingpin coupler set screws, please note the linked instructions below.

For 5/8 inch diameter leaf spring u-bolts like the #11-77 the correct amount of torque needed for the nuts is 100-120 ft lbs.

In order to replace the Dexter 023-359-00 left hand and 023-360-00 right hand braking assemblies you will want to use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-464-465 which will replace both sides and it's a direct bolt-on…

The Dexter part number 023-357-00 is a 12x2 electric brake assembly. The correct RH assembly to use to replace what you have would be the part #23-459 and for the LH assembly you would want the part #23-458 if you have 6K axles. If you have 7k axles…

It looks like Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2 Item #8-201-5UC3 could be the right replacement for you. You can check the bearing numbers if you still have the bearings. If they are 25580 for the inner and LM67048 then this…

Hey Connor, To replace the O-Ring that comes with the Replacement Oil Cap Kit for AL-KO and Hayes 10,000-lb to 16,000-lb Axles #K71-859-00 you'll need the part #DX97CR which has a 3.487" inner diameter.

I looked up the water pump you have and it's a 40 psi pump that flows 3.0 gallons per minute. The closest option we have is the HydroMax part #P25201 which can flow up to 3 gallons per minute and is rated for 55 psi.

As you have come to find out, the paddle style handle you have on your Wells Cargo Trailer is very large and they just don't make anything that large to replace this nowadays. The largest paddle style handle we have is the Paddle Handle Locking…

The Dexter 8-248 is a 3500 lb idler hub which uses the L44649 outer/L68149 inner bearing and a 10-19 grease seal. The bearings cross reference to the A4 and A17 bearings you mentioned and the 10-19 seal cross references to the 171255 seal. For…

The Curt trailer wiring harness for the 2013 Dodge Grand Caravan is #C56331. I could not find information on a 56187. The correct harness does not have an LED indicator light on it anywhere. There are some adapters, like #C57674, that have LED…

Based on my research the Lippert Kwikee 32 Series Electric Steps #LC372261 is the closest option we have available to your existing Coach model 725-0001 assembly. The mounting bracket does have an 8 inch x 22 inch bolt pattern and the steps…