Search: 30 Amp Twist Lock Adapter   >  

Yes, 10 AWG wire will fit in the Mighty Cord Replacement Twist Lock Connector for RVs #A10-30FDT.

Yes, the Furrion Automatic Transfer Switch #F30ATS has a wiring diagram on the inside of the cover. I've attached a picture of the diagram as well as a picture of the terminals with their functions.

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

I have a solution for you because as you know what you have now cannot charge Lithium batteries. You will need the Progressive Dynamics #PD4135K which is designed to replace your WF-8735P and is compatible with Lithium batteries. When this is…

WF-8735P is a 35-amp panel model. To upgrade to a lithium ready system you will need the Progressive Dynamics #PD4135K Converter/Smart Charger rated for 35-Amp. this system includes a high voltage output to provide full, quick charge for your lithium…

Yes, the Adco RV Cover for Travel Trailers #AD67ZR that you referenced does have an access panel for a trailer door at the rear of the trailer on the passenger side. If you check out the picture of a different model that I attached, you'll see…

Along with your Mighty Cord 30 Amp Twist Lock RV Power Inlet #A10-30INVP you can use their mating replacement female Twist Lock Connector #A10-30FDT. If you care to add a weather-resistant locking ring you can also use part #A10-30CV.

According to Go Power, their #GP44FR RV Battery Monitor Kit is indeed compatible with Lithium batteries. I've linked to a product description video for the monitor kit.

I attached a diagram that shows how the Deka Battery Isolator #DW08770 wires to a dual battery setup like you have.

According to Solara (Lippert), the correct number of turns to set the proper tension of their slide toppers like #LCV000163285 is between 12 to 16 turns, so I'd consider 14 to be a pretty good happy medium.

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

The correct Replacement Operator Mechanism for your model 4751KS MaxxAir MaxxFan is part #MA10-20281K-1AF. If your fan lid is unable to open even manually, then this is the part you need to replace. The other part you referenced, #MA10A04751KS would…