Search: 3 inch shackle strap   >   !Hitch Cargo Carrier   >  

Generally speaking, it is not a huge deal to upgrade one size (12" to 13") so long as you have clearance but the other thing to make note of is the surface area on the hub. If you have a 2,000 lb trailer axle then your hub is likely only…

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

To slightly lower your trailer that has had an "axle flip" kit installed you would want to use slightly shorter shackle straps, not longer ones. Shorter shackles will let the axle rest closer to the trailer frame, which lowers the trailer…

You can upgrade the 1750 lb leaf springs to 2500 lb leaf springs. You do want to keep in mind that the ride may be a bit stiffer since you are upgrading your springs to a higher capacity. Like you mention upgrading the springs will not give you a…

Yes the 4,000-lb leaf spring is compatible with a 3,500-lb axle. There are a couple of important measurements. Spacing from eye to eye on the spring when unloaded with no weight on the axle. Inner eye diameter of the spring roll Spring width from…

While we have not installed the 7-Way RV Upgrade Kit #ETBC7L on a 2019 Subaru Forester or the same generation in our shop. We do have a installation video of this installed on a 2020 Outback which is on the same Subaru Global Platform. So running the…

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

Trailer manufacturers don't usually keep a record of parts like these that they install at the factory, so I cannot be sure as to the exact length of the shackle strap that would have come originally on your trailer. With this in mind, a 3-1/8…

I do have an option for you but we currently do not have a standard trailer axle with a distance of 65-1/2" from the center of each spring seat. Instead, I recommend taking a look at the Timbren Axle-Less Trailer Suspension System part…

It depends on how much clearance you currently have around your wheels. Ideally, you should have 3 inches minimum clearance between your fender and your wheels and an inch minimum between your sidewall and trailer frame/wall. As your wheel size…

How is the adjustment of the assemblies? Typically the problem you are having is due to the assemblies not being adjusted properly. Ideally they are tight enough that there's a light drag as you turn them by hand. To see how to manually adjust…

You can use the Dexter E-Z Flex Suspension Kit #K71-653-00 in place of what you have now but the shorter shackles will change the height of your trailer as it currently sits. Your trailer will sit higher by about 1 inches.