Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Kenda trailer tires are primarily made in China like most trailer tires. The only Radial trailer tires that I'm aware of that are made in the United States are the Goodyear Endurance line. Carlisle has a bias ply line of tires made in the States,…
view full answer...The Trailer King RST are a pretty middle of the road tire, not bad but not a top of the line tire. On the other hand the Kenda Loadstar ST tires are a high quality tire designed and strenuously tested in Ohio to make sure the tires are as reliable,…
view full answer...The maximum load range of a trailer tire multiplied by the number of tires will need to be greater than the gross trailer weight (GTW) of the trailer. The Karrier ST225/75R15 Radial Trailer Tire with 15" White Wheel part #AM32664 has a maximum…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...If the trailer's GVWR is 2,500 pounds you'll be fine with a Load Range D or E tire. A 205/65-10 tire with Load Range D like #AM1HP54 is rated up to 1,330 pounds at 70 psi and the E tire like #AM1HP56 is rated up to 1,650 pounds at 90 psi.…
view full answer...Different size and bolt pattern wheels that take the same tire size will have different psi ratings. If your existing wheels are rated for 65 psi then it is less likely that they would also be rated for 80 psi which is what an ST225/75-15 load range…
view full answer...As with any manufacturer's recall, the old stock obtained by the vendors will be bought back from the manufacturer and replaced with the new updated version when available. The part number for the product rarely ever changes. I checked with our…
view full answer...The buttons, face and controls on the Lippert Smart Jack Electric Trailer Jack w/ Footplate - A-Frame - 22-1/2" Lift - 3.5K - Black #LC643589 are not a replaceable part. You will have to use your warranty if you are within its time frame or…
view full answer...Normally an intermittent working motorized jack like the Lippert Components Powered Tongue Jack #LC285318 is due to a faulty ground or a short circuit in the power wire. I recommend checking your ground connections, normally in the mount of the jack…
view full answer...The Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System Item #LC243621 has an length of 70-1/2" so you would need to have a frame distance of 71" to install this on the I-beams with the Lippert Tailgate Storage System…
view full answer...For the absolutely best performance and reliability you can't beat the HydraStar electric over hydraulic actuators. We have found that they are the most reliable, react the fastest and just in general work the best. For just the actuator you…
view full answer...It sounds like you are saying the cross-shaft is spinning but one of the legs is not extending/retracting. If that is the case then it sounds like you have a stripped gear in that leg. In order to fix this you can use the Follow Jack Repair Kit part…
view full answer...Related Searches
Filter Your Search
Contact and Help